pywinusb
pywinusb copied to clipboard
rene-aguirre
Question about get input and send output from my custom USB device.
Here are my codes:
import pywinusb.hid as hid
from ctypes import *
class hidHelper(object):
def __init__(self, vid=0x0483, pid=0xa005):
self.alive = False
self.device = None
self.report = None
self.vid = vid
self.pid = pid
def start(self):
_filter = hid.HidDeviceFilter(vendor_id = self.vid, product_id = self.pid)
hid_device = _filter.get_devices()
if len(hid_device) > 0:
self.device = hid_device[0]
self.device.open()
self.out_report = self.device.find_output_reports()
self.in_report = self.device.find_input_reports()
self.alive = True
def stop(self):
self.alive = False
if self.device:
self.device.close()
if __name__ == '__main__':
myhid = hidHelper()
myhid.start()
input_interrupt_transfers = False
if myhid.alive:
send_list = [0xFF]*1101
send_list[0] = 0xfd
myhid.out_report[0].send(send_list)
myhid.in_report[0].get()
import time
time.sleep(0.5)
myhid.stop()
I used bus hound to monitor the communication. I get output that PC sent to the device with full 0xFF and 0xFD in the first place twice, and I only expect once. Then there are response from my USB device but my code can not get that, is there any thing wrong with my code? @rene-aguirre @j3hyde @c1728p9 @ElectricRCAircraftGuy Thank you for your time!
Seems this quite excessive:
send_list = [0xFF]*1101
That'd cause to create a list of more than 1kB for your output report.
For the input report check the examples. Input reports are asynchronous, only feature reports can be polled.
You need to prepare a handler (callback) to receive the input reports.
On Mon, Aug 24, 2020 at 11:36 PM zhji2822 [email protected] wrote:
Here are my codes:
import pywinusb.hid as hid from ctypes import *
class hidHelper(object): def init(self, vid=0x0483, pid=0xa005): self.alive = False self.device = None self.report = None self.vid = vid self.pid = pid
def start(self): _filter = hid.HidDeviceFilter(vendor_id = self.vid, product_id = self.pid) hid_device = _filter.get_devices() if len(hid_device) > 0: self.device = hid_device[0] self.device.open() self.out_report = self.device.find_output_reports() self.in_report = self.device.find_input_reports() self.alive = True def stop(self): self.alive = False if self.device: self.device.close()if name == 'main': myhid = hidHelper() myhid.start() input_interrupt_transfers = False if myhid.alive: send_list = [0xFF]*1101 send_list[0] = 0xfd myhid.out_report[0].send(send_list) myhid.in_report[0].get() import time time.sleep(0.5) myhid.stop()
I used bus hound to monitor the communication. I get output that PC sent to the device with full 0xFF and 0xFD in the first place twice, and I only expect once. Then there are response from my USB device but my code can not get that, is there any thing wrong with my code? @rene-aguirre https://github.com/rene-aguirre Thank you for your time!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/rene-aguirre/pywinusb/issues/66, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAF3G7VDJVSDM2BT4IMCBJDSCNLYVANCNFSM4QKJEIVA .
Thank you for your help! I am afraid that I cannot change size of the input and output report size since it is fixed for the device I am communicating with. And for the handler part, do you mean use function that is written in core.py to define a handler for input report? it is copied below:
def add_event_handler(self, full_usage_id, handler_function,
event_kind = HID_EVT_ALL, aux_data = None):
"""Add event handler for usage value/button changes,
returns True if the handler function was updated"""
report_id = self.find_input_usage(full_usage_id)
if report_id != None:
# allow first zero to trigger changes and releases events
self.__input_report_templates[report_id][full_usage_id].__value = None
if report_id == None or not handler_function:
# do not add handler
return False
assert(isinstance(handler_function, collections.Callable)) # must be a function
# get dictionary for full usages
top_map_handler = self.__evt_handlers.get(full_usage_id, dict())
event_handler_set = top_map_handler.get(event_kind, dict())
# update handler
event_handler_set[handler_function] = aux_data
if event_kind not in top_map_handler:
top_map_handler[event_kind] = event_handler_set
if full_usage_id not in self.__evt_handlers:
self.__evt_handlers[full_usage_id] = top_map_handler
return True
It works! But I got duplicated output and input during the communication. I used bus hound for monitoring and it is shown in the image. Is this because of some default setting? that I need to change? I also uploaded my edited code below.
import pywinusb.hid as hid
import time
class hidHelper(object):
def __init__(self, vid=0x0483, pid=0xa005):
self.alive = False
self.device = None
self.report = None
self.vid = vid
self.pid = pid
def setcallback(self):
'''
设置接收数据回调函数
'''
if self.device:
self.device.set_raw_data_handler(self.read)
def read(self, data):
'''
接收数据回调函数
'''
print([hex(item).upper() for item in data[1:]])
def start(self):
'''
开始，打开HID设备
'''
_filter = hid.HidDeviceFilter(vendor_id = self.vid, product_id = self.pid)
hid_device = _filter.get_devices()
if len(hid_device) > 0:
self.device = hid_device[0]
self.device.open()
self.setcallback()
self.out_report = self.device.find_output_reports()
self.in_report = self.device.find_input_reports()
self.alive = True
def stop(self):
'''
停止，关闭HID设备
'''
self.alive = False
if self.device:
self.device.close()
if __name__ == '__main__':
myhid = hidHelper()
myhid.start()
input_interrupt_transfers = False
if myhid.alive:
send_list = [0xFF]*1101
send_list[0] = 0xfd
myhid.out_report[0].send(send_list)
myhid.in_report[0].get()
time.sleep(0.5)
myhid.stop()
The monitor shows you report is only 100 byte long, this shows there is something wrong with your descriptor.
Usually the report size limit is the endpoint transfer size limit.
Remove the .get() is not required.
On Wed, Aug 26, 2020 at 6:28 PM zhji2822 [email protected] wrote:
It works! But I got duplicated output and input during the communication. I used bus hound for monitoring and it is shown in the image. Is this because of some default setting? that I need to change? I also uploaded my edited code below.
[image: Capture] https://user-images.githubusercontent.com/28940774/91372846-5edbb300-e847-11ea-8945-9bb26ffc6fa2.PNG
import pywinusb.hid as hid
import time
class hidHelper(object):
def __init__(self, vid=0x0483, pid=0xa005): self.alive = False self.device = None self.report = None self.vid = vid self.pid = pid def setcallback(self): ''' 设置接收数据回调函数 ''' if self.device: self.device.set_raw_data_handler(self.read) def read(self, data): ''' 接收数据回调函数 ''' print([hex(item).upper() for item in data[1:]]) def start(self): ''' 开始，打开HID设备 ''' _filter = hid.HidDeviceFilter(vendor_id = self.vid, product_id = self.pid) hid_device = _filter.get_devices() if len(hid_device) > 0: self.device = hid_device[0] self.device.open() self.setcallback() self.out_report = self.device.find_output_reports() self.in_report = self.device.find_input_reports() self.alive = True def stop(self): ''' 停止，关闭HID设备 ''' self.alive = False if self.device: self.device.close()if name == 'main':
myhid = hidHelper() myhid.start() input_interrupt_transfers = False if myhid.alive: send_list = [0xFF]*1101 send_list[0] = 0xfd myhid.out_report[0].send(send_list) myhid.in_report[0].get() time.sleep(0.5) myhid.stop()— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/rene-aguirre/pywinusb/issues/66#issuecomment-681237144, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAF3G7STTDJVGR3PFVR6E6DSCWZE3ANCNFSM4QKJEIVA .
Thank you. I am confused about where did you get that my report is 100 byte long. if you got that by looking at the length of input/output data, you were mislead by my mistake. Sorry, to make fewer screening shots I limited the number of bytes bus hound show. and here are the complete screen shots. The actual data is 1101 bytes long but we can find it sent out same output data twice to the USB device. and I only have one send order.
