MT762X WM8960 ALSA SoC machine driver

ALSA SoC machine driver for MT762X SoCs with WM8960 CODEC chip.

Requirements

• OpenWrt with kernel 5.10 or later.

Preparing

• Add the mt762x-wm8960 folder to the package/kernel folder of OpenWrt.

cd package/kernel
git clone https://github.com/redchenjs/mt762x-wm8960.git

• Modify the target DTS file in the target/linux/ramips/dts folder of OpenWrt according to the example DTS files.

WM8960 MCLK

WM8960 can get MCLK from an externel clock source or the refclk output of MT762X SoCs (12MHz). To enable the refclk output, you can modify the dts file as follows:

refclk {
	groups = "refclk";
	function = "refclk";
};

WM8960 ADCLRC

WM8960 can internally get ADCLRC from DACLRC and the ADCLRC pin can be used as GPIO1. It is useful for some boards that only have the DACLRC pin connected and the ADCLRC pin is left floating. To enable this feature, modify the dts file as follows:

codec: wm8960@1a {
	compatible = "wlf,wm8960";
	reg = <0x1a>;
	wlf,shared-lrclk;
	wlf,hp-cfg = <0 0 0>;
	wlf,gpio-cfg = <1 0>;
};

Configuring the OpenWrt

make menuconfig

Kernel modules:

• Navigate to > Kernel modules > Sound Support.
• Select kmod-sound-core and kmod-sound-mt762x-wm8960.

Userspace tools:

• Navigate to > Sound and select alsa-utils.

Building the image

make -j9 V=s

Settings

Examples of /etc/asound.conf:

• examples/asound.conf.alsa for ALSA only.
• examples/asound.conf.pulse for PulseAudio.

After restarting, the output of WM8960 is muted. Use these commands to set the volume.

amixer sset "Headphone" 90
amixer sset "Speaker" 90

Playback

amixer sset "Left Output Mixer PCM" on
amixer sset "Right Output Mixer PCM" on

Capture

amixer sset "Left Input Mixer Boost" on
amixer sset "Right Input Mixer Boost" on
amixer sset "ALC Function" "Stereo"

References

WM8960 block diagram