red0909

so 14 days now with experimental fw, no reboot no problems with the wifi.

no problems as far i can see, but i am not using mqtt or homeasistant. running stable no reboot with cheap esp32 module canbus signal is stable too

@jetronic18s what powersupply do you have for the controller? have you measured the voltage at the controller screws? i think this is some sort of a power issue

i never had this problem with 4.4 and 4.5 controller, but i dont have relays for bms internal error rule

i have the sunny island running with the diy bms in the old code it was possible with the victron canbus settings now(firmware 2023 02 14) it is possible with...

yes charge efficency was at 99% interesting, if the shunt should reset to 100% at full charge it reset to the Charge efficiency factor % value this was not the...

what is the charge efficency factor for, if it has to be set to 100% ? make no sence for me, ok i will set it to 100%...

i undestand, but in this case if i set 99,5% efficency it wil never reset to 100%... but it has to

any news on this issue? is a bugfix possible?

hmm, so i have to live with the 99% on full? if i set the efficency to 100% then the soc calculation is to high if the battery dont charge...