red0909

@stuartpittaway strange my soc survive after reboot of the controller but not if i disconnect my external shunt pcb from power then the soc is gone

this bypass setting does not work if dynamic charge voltage is used. the cell voltages desnt go over the set bypass voltage because of the charging algorithm. the cell runaway...

this would be a nice feature if you can change this. so the cells can balance over time with the new 4.9 module. now they are not balancing if dynamic...

3,5V is optimal its enough for balancing, but your method does not work for me look the image above the bypass voltage is never reached and if its reached, if...

the experimental firmware does not start on my esp, black screen. tried with two different esp32 and two different computers

ok now it is running. disconnected wifi several times, no reboot. now i need to wait some days and watch how my inverter behaves

now it is running for two days no issues so far. but i noticed that the controller refuses to connect to network with hidden ssid, this was possible with december...

> I've a log file from another user who has tested this firmware and unfortunately it didn't solve his reboot. He uses a Fritzbox which does appear to be a...

> Sadly i have no logs, but also a Fritz!Box and the same issues. try to make a wifi hotspot on your phone and connect to that. if it will...

> Which other router you bought? dlink dsr-250n it need some tricky fw updates 5 times to the new fw but this router is not longer supported and should not...