"Observer Height" not stored / retrieved as part of blind-control -> position-config

[updor]

Describe the bug When I set the "Observer Height" within the position-config dialog,

• the value survives when I close and re-open the dialog by pressing "Update"
• but the value will not be kept once I've "Deployed" the node and re-open the dialog.

I tried this with context store:

• none
• memory
• filestorage (added this context store to test if it would fix the problem)

Screenshots

Enter Observer Height

Value entered does not survive a "Update" followed by "Deploy"

Expected behavior It should be possible to store the "observer heigth" assuming that the blind-control code uses it.

System information (please complete the following information):

• Node Version [2.2.0 beta 3]
• Node-Red Version [3.0.2]

[GeorgeCastanza]

Did you find a workaround? This is (I think) causing my blind not to open. The time/control rules works, but not the sun control.......as there (seems to be) something missing from the calculation.

[updor]

Sorry, Didn't find any.

[astrosteve0]

Exact same issue here with sun-position and moon-position. I can update height go out, come back in, there's the height, just fine. Once I hit deploy, and go back in and look, the height is gone.

[Robotron80]

Same problem here...

[nefh]

Any progress? Issue seems to still persist

[erlsta]

I observe the exact same behaviour on my system. Using Node-RED v 3.1.5 in Home Assistant with this add-on: https://community.home-assistant.io/t/home-assistant-community-add-on-node-red/55023 I also have the Node-RED companion integration installed.