rayray4105

side note: the log is filling with these lines (this was always the case) in regard to all devices which makes working with log rather impossible. Is there an option...

``` [15/05/2024, 17:46:02] [deCONZ] Phoscon-GW: request 24: GET /devices/bc:33:ac:ff:fe:67:f8:78/ddf [15/05/2024, 17:46:02] [deCONZ] Phoscon-GW: request 24: 200 OK [15/05/2024, 17:46:02] [deCONZ] Phoscon-GW: On/Off plug-in unit 30: exposed by gold ddf [15/05/2024,...

the beta now exposed the cords. see the log below ``` [16/05/2024, 15:45:49] [deCONZ] Phoscon-GW: request 24: GET /devices/bc:33:ac:ff:fe:67:f8:78/ddf [16/05/2024, 15:45:49] [deCONZ] Phoscon-GW: request 24: 200 OK [16/05/2024, 15:45:49] [deCONZ]...

Eve shows 'last on' for each outlet. A for each loop should indeed not run a fourth time. Unless you run an integer loop 0 to device.count because then it...

Running v20.12.2

we have already tried but as mentioned in the ticket that does not work. The code runs fine but the model is not coordinated correctly (default location is used). Dim...

For now we have seemed to be able to resolve this issue by adding Nuget package: Revit_All_Main_Versions_IFC_x64 https://www.nuget.org/packages/Revit_All_Main_Versions_IFC_x64/2024.0.0?_src=template Make sure you use the correct version.