[Ray Cluster Launcher] ray cluster launcher can't start worker node

[shuiqingliu]

What happened + What you expected to happen

1. Bug When starting a Ray cluster with one head node and three worker nodes, ray status keeps indicating "no cluster". The startup steps have to be repeated several times until successful, but it is unclear how many restarts are needed to achieve success. As illustrated in the image below, I kept executing ray up and it eventually started. However, we did not modify anything.

2. Expectation Successfully deploy the cluster on the first attempt.

3. Useful info Observations: 1.The Ray head node Docker container can always start properly. The ray start command inside the container also executes correctly, since ray status can be run. 2.ray status shows that worker nodes remain in the "launching" state or indicate that there is no Ray cluster.

Versions / Dependencies

ray 2.23.0

Reproduction script

• ray up execute OS: Mac OSX with ray 2.23.0
• docker image: rayproject/ray-ml this is my config of ray up command, and run as ray up --no-config-cache -y -v ./example-full.yaml The IP addresses are hidden, but the original IPs are all public and can mutually access each other via SSH.

# A unique identifier for the head node and workers of this cluster.
cluster_name: xxx-cluster

# Running Ray in Docker images is optional (this docker section can be commented out).
# This executes all commands on all nodes in the docker container,
# and opens all the necessary ports to support the Ray cluster.
# Empty string means disabled. Assumes Docker is installed.
docker:
    image: "rayproject/ray-ml:latest-gpu" # You can change this to latest-cpu if you don't need GPU support and want a faster startup
#    image: "rayproject/ray:latest-py39-gpu" # You can change this to latest-cpu if you don't need GPU support and want a faster startup
    # image: rayproject/ray:latest-gpu   # use this one if you don't need ML dependencies, it's faster to pull
    container_name: "ray_container"
    # If true, pulls latest version of image. Otherwise, `docker run` will only pull the image
    # if no cached version is present.
    pull_before_run: True
    run_options:   # Extra options to pass into "docker run"
        - --ulimit nofile=65536:65536

provider:
    type: local
    head_ip: x.x.x.1
    # You may need to supply a public ip for the head node if you need
    # to run `ray up` from outside of the Ray cluster's network
    # (e.g. the cluster is in an AWS VPC and you're starting ray from your laptop)
    # This is useful when debugging the local node provider with cloud VMs.
    worker_ips: [x.x.x.2,x.x.x.3,x.x.x.4]
    # Optional when running automatic cluster management on prem. If you use a coordinator server,
    # then you can launch multiple autoscaling clusters on the same set of machines, and the coordinator
    # will assign individual nodes to clusters as needed.
    #    coordinator_address: "<host>:<port>"

# How Ray will authenticate with newly launched nodes.
auth:
    ssh_user: xxxx
    # You can comment out `ssh_private_key` if the following machines don't need a private key for SSH access to the Ray
    # cluster:
    #   (1) The machine on which `ray up` is executed.
    #   (2) The head node of the Ray cluster.
    #
    # The machine that runs ray up executes SSH commands to set up the Ray head node. The Ray head node subsequently
    # executes SSH commands to set up the Ray worker nodes. When you run ray up, ssh credentials sitting on the ray up
    # machine are copied to the head node -- internally, the ssh key is added to the list of file mounts to rsync to head node.
    ssh_private_key: ~/.ssh/id_rsa

# The minimum number of workers nodes to launch in addition to the head
# node. This number should be >= 0.
# Typically, min_workers == max_workers == len(worker_ips).
# This field is optional.
min_workers: 3

# The maximum number of workers nodes to launch in addition to the head node.
# This takes precedence over min_workers.
# Typically, min_workers == max_workers == len(worker_ips).
# This field is optional.
max_workers: 3
# The default behavior for manually managed clusters is
# min_workers == max_workers == len(worker_ips),
# meaning that Ray is started on all available nodes of the cluster.
# For automatically managed clusters, max_workers is required and min_workers defaults to 0.

# The autoscaler will scale up the cluster faster with higher upscaling speed.
# E.g., if the task requires adding more nodes then autoscaler will gradually
# scale up the cluster in chunks of upscaling_speed*currently_running_nodes.
# This number should be > 0.
upscaling_speed: 10.0

idle_timeout_minutes: 5

# Files or directories to copy to the head and worker nodes. The format is a
# dictionary from REMOTE_PATH: LOCAL_PATH. E.g. you could save your conda env to an environment.yaml file, mount
# that directory to all nodes and call `conda -n my_env -f /path1/on/remote/machine/environment.yaml`. In this
# example paths on all nodes must be the same (so that conda can be called always with the same argument)
file_mounts: {
#     "~/.ssh/": "/Users/qingliu/PycharmProjects/pdftrans/src/surya/ssh",
#    "/path2/on/remote/machine": "/path2/on/local/machine",
}

# Files or directories to copy from the head node to the worker nodes. The format is a
# list of paths. The same path on the head node will be copied to the worker node.
# This behavior is a subset of the file_mounts behavior. In the vast majority of cases
# you should just use file_mounts. Only use this if you know what you're doing!
cluster_synced_files: []

# Whether changes to directories in file_mounts or cluster_synced_files in the head node
# should sync to the worker node continuously
file_mounts_sync_continuously: False

# Patterns for files to exclude when running rsync up or rsync down
rsync_exclude:
    - "**/.git"
    - "**/.git/**"

# Pattern files to use for filtering out files when running rsync up or rsync down. The file is searched for
# in the source directory and recursively through all subdirectories. For example, if .gitignore is provided
# as a value, the behavior will match git's behavior for finding and using .gitignore files.
rsync_filter:
    - ".gitignore"

# List of commands that will be run before `setup_commands`. If docker is
# enabled, these commands will run outside the container and before docker
# is setup.
initialization_commands: []

# List of shell commands to run to set up each nodes.
setup_commands: []
    # If we have e.g. conda dependencies stored in "/path1/on/local/machine/environment.yaml", we can prepare the
    # work environment on each worker by:
    #   1. making sure each worker has access to this file i.e. see the `file_mounts` section
    #   2. adding a command here that creates a new conda environment on each node or if the environment already exists,
    #     it updates it:
    #      conda env create -q -n my_venv -f /path1/on/local/machine/environment.yaml || conda env update -q -n my_venv -f /path1/on/local/machine/environment.yaml
    #
    # Ray developers:
    # you probably want to create a Docker image that
    # has your Ray repo pre-cloned. Then, you can replace the pip installs
    # below with a git checkout <your_sha> (and possibly a recompile).
    # To run the nightly version of ray (as opposed to the latest), either use a rayproject docker image
    # that has the "nightly" (e.g. "rayproject/ray-ml:nightly-gpu") or uncomment the following line:
    # - pip install -U "ray[default] @ https://s3-us-west-2.amazonaws.com/ray-wheels/latest/ray-3.0.0.dev0-cp37-cp37m-manylinux2014_x86_64.whl"

# Custom commands that will be run on the head node after common setup.
head_setup_commands: []

# Custom commands that will be run on worker nodes after common setup.
worker_setup_commands: []

# Command to start ray on the head node. You don't need to change this.
head_start_ray_commands:
  # If we have e.g. conda dependencies, we could create on each node a conda environment (see `setup_commands` section).
  # In that case we'd have to activate that env on each node before running `ray`:
  # - conda activate my_venv && ray stop
  # - conda activate my_venv && ulimit -c unlimited && ray start --head --port=6379 --autoscaling-config=~/ray_bootstrap_config.yaml
    - ray stop
    - ulimit -c unlimited && ray start --head --port=6379 --autoscaling-config=~/ray_bootstrap_config.yaml

# Command to start ray on worker nodes. You don't need to change this.
worker_start_ray_commands:
  # If we have e.g. conda dependencies, we could create on each node a conda environment (see `setup_commands` section).
  # In that case we'd have to activate that env on each node before running `ray`:
  # - conda activate my_venv && ray stop
  # - ray start --address=$RAY_HEAD_IP:6379
    - ray stop
    - ray start --address=$RAY_HEAD_IP:6379

Issue Severity

High: It blocks me from completing my task.