ravi-varadarajan

@rovinski @msaligane Is there any resolution on this. I was setting up some experiments with skywater on innovus and am running into the same issue. Wiuth the 'hd' library, Innovus...

Hi @antonblanchard and @QuantamHD - In our runs with ORFS we turn on both ROUTABILITY_DRIVEN and TIMING_DRIVEN as default and have observed overall better QoR with those options turned on....

yes -- fence, region, guide support is being planned -- We are currently looking at looking at those constraint sin DREAMPlace to see what is currently supported. Apart from the...

@antonblanchard Please contact if you need help in setting up the flow. To use RTL-MP you will need Verilog hierarchy in the input netlist.

In the default flow, the global placement engine (in the presence of Macros and std cells) will create overlaps between macros and stdcells. The default macro placer in OpenROAD uses...

I examined the congested areas and it is due the dense concentration of combinational cells (4 input nor or ao22/oa22) in the congested area. You should be able to resolve...

@nmoroze To confirm your use model you are initializing a floorplan with read_def -floorplan_initialize and in the COMPONENT section of the DEF there is +HALO which is currently throwing an...

If it is stored as a PORPERTY on the COMPONENT, we can use during macro placement

This is an enhancement request. mpl2 should be able to handle cases where some of the macros are pre-placed

This check to read the manual macro placement is only for TMP and not for rtlmp2. I will add it to mpl2 too in macro_place.tcl. However we will need to...