rpi-imager

rpi-imager copied to clipboard

Windows 11 "advanced" settings do not configure properly

20

I was trying to use a raspberry pi zero, and put Raspbian lite on there and per my normal procedure I would use the settings (either by shift+ctrl+x or using...

dillondriskill

Imager breaks if Comodo revocation checking endpoints are blocked or offline

3

Logging for Scott Helme He's seeing:  > _It seems that it's reaching out to the Comodo revocation checking endpoints. This is kind of interesting because if you think about...

matt40k

make 'advanced options' work for the debian images

2

I use the rpi-imager to install debian images for rpi4 using the "custom". unfortunately the advanced options do not work for "custom". could this be fixed by adding the debian...

andrewufrank

Proxy (with authentication support) on Windows

2

Currently the rpi-imager app does not seem to detect or respect an http proxy requiring authentication on at least Windows 10. Unfortunately these proxy systems are still common in education...

MisterAnderson91

userconfig.service hangs when using new config menu for flashing

1

I flashed raspberry pi os lite 32-bit onto a 16GB SD card and booted it on a raspberry pi v4. For flashing, I used the following settings within new config...

nilskuhn

Can't get an image written

1

I am running Rasberry Pi Imager 1.7.3 on a 2017 MacBook Pro, running Ventura 13.1 Trying to write an image to an SD, It gets part way through the process,...

pquodling

After several attempts only SD cards could be written. Always errors on writing an SSD in the verification part. First part writing looks ok first, but result is not usable...

GnomiBerlin

Confirm when writing to a disk that is not an SD card

1

The Pi Imager overwrote a 2TB hard drive that contains important data because the less-than-descriptive label for the drive didn't make it obvious to me that that is what I...

adamvleggett

Feature request: write final image into custom file or device

8

I would like to download and prepare an image using `rpi-imager`, but **write it into a custom file**. The goal is to do further work on the image, before I...

jimis

I would like the raspberry pi imager to have a more user friendly keyboard layout selector. Currently it only shows the two character country codes which makes it very difficult...

veleek