raspberrypi
After burning flash_nuke.uf2 to the RP2350B0A4, the RP2350 device does not eject.
Device: RP2350B0A4 File: flash_nuke.uf2 OS: Windows 11 Download link: https://datasheets.raspberrypi.com/soft/flash_nuke.uf2
Problem Description: I tried clearing the Flash memory on an RP2350B0A4 board, and following the official documentation, I put the board into BOOT mode and dragged in flash_nuke.uf2. The burning process appeared normal (UF2 file copied successfully, no errors), but after burning, the device did not automatically enumerate as the "RP2350" drive letter as normal. The same flash_nuke.uf2 file worked normally on both RP2350A0A2 and RP2350B0A2.
Actual Behavior: The RP2350B0A4 is successfully burned, but no drive letter appears; it enters a state similar to "unresponsive."
Expected behavior: After flash_nuke.uf2 is burned onto the RP2350B0A4, it should automatically reboot and mount the RP2350.
We hope the official team can confirm: Does flash_nuke.uf2 already support the RP2350B0A4? If not, will the tool be updated? What is the estimated timeframe?
Thank you for your work, and we look forward to your reply!
Yes, it needs a rebuild. This version seems to work for me
