linux

linux copied to clipboard

WPA3 broken on Pi 3 with 6.6 (and works with 6.1)

52

### Describe the bug When I run a 6.1 kernel on a Pi 3, using IWD, WPA3 works as expected. However, simply switching to the 6.6 kernel breaks this: the...

spockfish

### Describe the bug Bcachefs is an exciting new filesystem that was merged into mainline kernel since release 6.7. Please enable support for this FS as a module in 6.8...

bmilde

The "output format" property had been lost in switching to 6.6, and it appears was never implemented for Pi0-3 (only full/limited range RGB). I want to double check the CCM...

6by9

Don't merge - this is for iterative debug (so build artefacts can be fetched via rpi-update).

P33M

stable_* tags missing for 6.6.y kernels

12

### Describe the bug I'm integrating RPi Linux into NixOS. I've seen the announcement that RPi OS is receiving Linux 6.6, and I've seen that the default branch of this...

peat-psuwit

Diagnosing unreliable reboots

9

This is a continuation of https://github.com/raspberrypi/firmware/issues/1559, a thread which is so long that the important diagnostic questions have got lost in the middle. https://github.com/raspberrypi/firmware/issues/1559 was specifically about Pi 4, but...

pelwell

USB HUB problems

2

**Describe the bug** When connect a hub to the pi the devices disconnect after a few minutes. I try with a known good pi and a brand new hub and...

appleimperio

CM4 after reboot NIC (eth0) disappears / no ethernet connection

24

### Describe the bug Hi, I have a CM4 with EMMC and without wireless with official CM4 board and sometimes after reboot the NIC connection disappears. To get it work...

JN19aban

PI 7" Screen DSI issue on RPI 5 Board

3

### Describe the bug The official touchscreen doesn't work on the PI5(stays off, no sign of light or output). With the exact same SD-Card(same installation) on the RPI 3 Board...

donmahallem

PCI Express regression on CM4 / CM4 IO Board on stable_20231004 (6.1.54, Bookworm)

28

### Describe the bug Hi, I switched from Raspberry Pi OS version 11 to version 12 on my Compute Module 4 IO Board, and noticed the SATA PCIe adapter I'm...

julienrobin28