no interface shows up with a mt76x2u driver managing a wifi card

[solsticedhiver]

Describe the bug

with a Netgear A6210 usb wifi card, no interface is showing up on rpi3b or rpi2 with 6.6.10 (or 6.6.11) on archlinuxARM (32 bit)

Steps to reproduce the behaviour

just boot the rpi with the usb card, plugged in, or plug it in, when the rpi is booted

You can check that the module has been loaded with lsmod, but no interface shows up in ip link or iw list

Device (s)

Raspberry Pi 2 Mod. B, Raspberry Pi 3 Mod. B

System

• ri2b, ARchlinuxARM (armv7, 32 bit), version 30f0c5e4d076da3ab4f341d88e7d505760b93ad7, 6.6.11-rpi-ARCH
• rpi3b, archlinuxARM (armv7, 32 bit), version 30f0c5e4d076da3ab4f341d88e7d505760b93ad7, 6.6.11-rpi-ARCH

Logs

kernel: usb 1-1.3: new high-speed USB device number 7 using dwc_otg
kernel: usb 1-1.3: New USB device found, idVendor=0846, idProduct=9053, bcdDevice= 1.00
kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 1-1.3: Product: A6210
kernel: usb 1-1.3: Manufacturer: NETGEAR
kernel: usb 1-1.3: SerialNumber: 100
kernel: usb 1-1.3: reset high-speed USB device number 7 using dwc_otg
kernel: mt76x2u 1-1.3:1.0: ASIC revision: 76120044
kernel: page_pool_create() gave up with errno -22
kernel: mt76x2u: probe of 1-1.3:1.0 failed with error -22

Additional context

It works fine on a 6.1.66 kernel

[solsticedhiver]

hello ? anywhere there ?