linux icon indicating copy to clipboard operation
linux copied to clipboard

Published 20 hours ago • verified publisher icon raspberrypi

raspberrypi 4 don't show unicode between 8602(↚) and 8703(⇿)

Open dty717 opened this issue 3 years ago • 3 comments

Describe the bug

Raspberrypi 4 just show □ when unicode is between 8602(↚) and 8703(⇿).

Steps to reproduce the behaviour

Copy the unicode between 8602(↚) and 8703(⇿), it will show □.

Device (s)

Raspberry Pi 4 Mod. B

System

OS and version:Raspberry Pi reference 2022-04-04 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 226b479f8d32919c9fe36dd5b4c20c02682f8180, stage5 firmware :version e5a963efa66a1974127860b42e913d2374139ff5 (clean) (release) (start) kernel :Linux raspberrypi 5.15.32-v7l+ #1538 SMP Thu Mar 31 19:39:41 BST 2022 armv7l GNU/Linux

Logs

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.32-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP Thu Mar 31 19:39:41 BST 2022 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.5 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 503104 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:BF:F0:11 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=5d697b61-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000015a00000-0x0000000019a00000] (64MB) [ 0.000000] Memory: 1587568K/2019328K available (10240K kernel code, 1390K rwdata, 3292K rodata, 2048K init, 590K bss, 104080K reserved, 327680K cma-reserved, 1232896K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35355 entries in 104 pages [ 0.000000] ftrace: allocated 104 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] random: get_random_bytes called from start_kernel+0x574/0x758 with crng_init=1 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000018] Switching to timer-based delay loop, resolution 18ns [ 0.000299] Console: colour dummy device 80x30 [ 0.000363] printk: console [tty1] enabled [ 0.000429] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000460] pid_max: default: 32768 minimum: 301 [ 0.000598] LSM: Security Framework initializing [ 0.000751] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000779] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002303] cgroup: Disabling memory control group subsystem [ 0.002534] CPU: Testing write buffer coherency: ok [ 0.002588] CPU0: Spectre BHB: using loop workaround [ 0.003015] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004223] Setting up static identity map for 0x200000 - 0x20003c [ 0.004423] rcu: Hierarchical SRCU implementation. [ 0.005366] smp: Bringing up secondary CPUs ... [ 0.006506] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006523] CPU1: Spectre BHB: using loop workaround [ 0.007802] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007819] CPU2: Spectre BHB: using loop workaround [ 0.009054] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009071] CPU3: Spectre BHB: using loop workaround [ 0.009227] smp: Brought up 1 node, 4 CPUs [ 0.009247] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009266] CPU: All CPU(s) started in HYP mode. [ 0.009279] CPU: Virtualization extensions available. [ 0.010092] devtmpfs: initialized [ 0.025228] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.025443] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.025477] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.034891] pinctrl core: initialized pinctrl subsystem [ 0.036107] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.040399] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.041186] audit: initializing netlink subsys (disabled) [ 0.041438] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.042044] thermal_sys: Registered thermal governor 'step_wise' [ 0.042778] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.042800] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.043187] Serial: AMBA PL011 UART driver [ 0.056736] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090045] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:19:26, variant start [ 0.100061] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5 [ 0.159007] Kprobes globally optimized [ 0.164513] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.169144] vgaarb: loaded [ 0.169592] SCSI subsystem initialized [ 0.169827] usbcore: registered new interface driver usbfs [ 0.169906] usbcore: registered new interface driver hub [ 0.169978] usbcore: registered new device driver usb [ 0.170943] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.171424] pps_core: LinuxPPS API ver. 1 registered [ 0.171439] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected] [ 0.171474] PTP clock support registered [ 0.173119] clocksource: Switched to clocksource arch_sys_counter [ 0.253829] VFS: Disk quotas dquot_6.6.0 [ 0.253930] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.254109] FS-Cache: Loaded [ 0.254289] CacheFiles: Loaded [ 0.263500] NET: Registered PF_INET protocol family [ 0.263728] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.265295] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.265329] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.265395] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.265468] TCP: Hash tables configured (established 8192 bind 8192) [ 0.265621] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.265659] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.265910] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.266894] RPC: Registered named UNIX socket transport module. [ 0.266912] RPC: Registered udp transport module. [ 0.266927] RPC: Registered tcp transport module. [ 0.266940] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.266961] PCI: CLS 0 bytes, default 64 [ 1.124235] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.126829] Initialise system trusted keyrings [ 1.127077] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.136154] zbud: loaded [ 1.138101] FS-Cache: Netfs 'nfs' registered for caching [ 1.138963] NFS: Registering the id_resolver key type [ 1.139002] Key type id_resolver registered [ 1.139017] Key type id_legacy registered [ 1.139154] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139170] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.140253] Key type asymmetric registered [ 1.140269] Asymmetric key parser 'x509' registered [ 1.140498] bounce: pool size: 64 pages [ 1.140560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.140786] io scheduler mq-deadline registered [ 1.140803] io scheduler kyber registered [ 1.149913] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.149954] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.150047] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.150147] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [ 1.235224] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.235630] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.235650] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.235672] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.235760] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.236003] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.239680] PCI: bus0: Fast back to back transfers disabled [ 1.239703] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.240076] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.240206] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.240636] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.244344] PCI: bus1: Fast back to back transfers disabled [ 1.244364] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.244406] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.244433] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.244517] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.244542] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.244949] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.245179] pcieport 0000:00:00.0: PME: Signaling with IRQ 78 [ 1.252635] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.255885] iproc-rng200 fe104000.rng: hwrng registered [ 1.256276] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.257832] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.270377] brd: module loaded [ 1.280623] loop: module loaded [ 1.281394] Loading iSCSI transport class v2.0-870. [ 1.286617] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.383300] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.384491] usbcore: registered new interface driver r8152 [ 1.384559] usbcore: registered new interface driver lan78xx [ 1.384652] usbcore: registered new interface driver smsc95xx [ 1.430876] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.430914] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.436541] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890 [ 1.437878] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.437903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.437923] usb usb1: Product: xHCI Host Controller [ 1.437940] usb usb1: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd [ 1.437956] usb usb1: SerialNumber: 0000:01:00.0 [ 1.438689] hub 1-0:1.0: USB hub found [ 1.438789] hub 1-0:1.0: 1 port detected [ 1.439461] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.439489] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.439514] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.439977] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.439999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.440019] usb usb2: Product: xHCI Host Controller [ 1.440035] usb usb2: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd [ 1.440051] usb usb2: SerialNumber: 0000:01:00.0 [ 1.440760] hub 2-0:1.0: USB hub found [ 1.440832] hub 2-0:1.0: 4 ports detected [ 1.442642] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.443013] dwc_otg: FIQ enabled [ 1.443027] dwc_otg: NAK holdoff enabled [ 1.443040] dwc_otg: FIQ split-transaction FSM enabled [ 1.443057] Module dwc_common_port init [ 1.443527] usbcore: registered new interface driver uas [ 1.443652] usbcore: registered new interface driver usb-storage [ 1.443856] mousedev: PS/2 mouse device common for all mice [ 1.449257] sdhci: Secure Digital Host Controller Interface driver [ 1.449274] sdhci: Copyright(c) Pierre Ossman [ 1.450022] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.453771] ledtrig-cpu: registered to indicate activity on CPUs [ 1.454107] hid: raw HID events driver (C) Jiri Kosina [ 1.454289] usbcore: registered new interface driver usbhid [ 1.454305] usbhid: USB HID core driver [ 1.460106] Initializing XFRM netlink socket [ 1.460150] NET: Registered PF_PACKET protocol family [ 1.460259] Key type dns_resolver registered [ 1.460695] Registering SWP/SWPB emulation handler [ 1.461500] registered taskstats version 1 [ 1.461530] Loading compiled-in X.509 certificates [ 1.462450] Key type ._fscrypt registered [ 1.462467] Key type .fscrypt registered [ 1.462481] Key type fscrypt-provisioning registered [ 1.474871] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.475188] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.475322] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 1.483613] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [ 1.484476] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 35, base_baud = 62500000) is a 16550 [ 1.485957] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.486446] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.487703] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.487723] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.524234] of_cfs_init [ 1.524375] of_cfs_init: OK [ 1.552470] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.552915] Waiting for root device PARTUUID=5d697b61-02... [ 1.617655] mmc1: new high speed SDIO card at address 0001 [ 1.663278] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 1.664194] mmcblk0: mmc0:0001 SD32G 28.9 GiB [ 1.667438] mmcblk0: p1 p2 [ 1.667992] mmcblk0: mmc0:0001 SD32G 28.9 GiB [ 1.700032] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.700053] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.723193] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.887861] EXT4-fs (mmcblk0p2): recovery complete [ 1.890352] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 1.890435] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.896031] devtmpfs: mounted [ 1.905833] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.905860] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.905880] usb 1-1: Product: USB2.0 Hub [ 1.907228] Freeing unused kernel image (initmem) memory: 2048K [ 1.907678] Run /sbin/init as init process [ 1.907694] with arguments: [ 1.907707] /sbin/init [ 1.907720] splash [ 1.907742] with environment: [ 1.907755] HOME=/ [ 1.907767] TERM=linux [ 1.909148] hub 1-1:1.0: USB hub found [ 1.909448] hub 1-1:1.0: 4 ports detected [ 2.250855] systemd[1]: System time before build time, advancing clock. [ 2.357870] NET: Registered PF_INET6 protocol family [ 2.359637] Segment Routing with IPv6 [ 2.359681] In-situ OAM (IOAM) with IPv6 [ 2.440964] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.441825] systemd[1]: Detected architecture arm. [ 2.443868] systemd[1]: Set hostname to . [ 3.179949] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.385349] systemd[1]: Queued start job for default target Graphical Interface. [ 3.386967] random: systemd: uninitialized urandom read (16 bytes read) [ 3.390986] systemd[1]: Created slice system-getty.slice. [ 3.391433] random: systemd: uninitialized urandom read (16 bytes read) [ 3.392484] systemd[1]: Created slice system-modprobe.slice. [ 3.392609] random: systemd: uninitialized urandom read (16 bytes read) [ 3.393603] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.394530] systemd[1]: Created slice User and Session Slice. [ 3.395098] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.396205] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.396917] systemd[1]: Reached target Slices. [ 3.397176] systemd[1]: Reached target Swap. [ 3.398288] systemd[1]: Listening on Syslog Socket. [ 3.399056] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.399522] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.400659] systemd[1]: Listening on Journal Audit Socket. [ 3.401464] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.402478] systemd[1]: Listening on Journal Socket. [ 3.409221] systemd[1]: Listening on udev Control Socket. [ 3.410113] systemd[1]: Listening on udev Kernel Socket. [ 3.411011] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.416409] systemd[1]: Mounting POSIX Message Queue File System... [ 3.422691] systemd[1]: Mounting RPC Pipe File System... [ 3.429912] systemd[1]: Mounting Kernel Debug File System... [ 3.437461] systemd[1]: Mounting Kernel Trace File System... [ 3.438508] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.449786] systemd[1]: Starting Restore / save the current clock... [ 3.459670] systemd[1]: Starting Set the console keyboard layout... [ 3.468037] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.475344] systemd[1]: Starting Load Kernel Module configfs... [ 3.482901] systemd[1]: Starting Load Kernel Module drm... [ 3.490855] systemd[1]: Starting Load Kernel Module fuse... [ 3.496105] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.503426] systemd[1]: Starting File System Check on Root Device... [ 3.517447] systemd[1]: Starting Journal Service... [ 3.532767] systemd[1]: Starting Load Kernel Modules... [ 3.540308] systemd[1]: Starting Coldplug All udev Devices... [ 3.559063] fuse: init (API version 7.34) [ 3.559987] systemd[1]: Mounted POSIX Message Queue File System. [ 3.560917] systemd[1]: Mounted RPC Pipe File System. [ 3.561792] systemd[1]: Mounted Kernel Debug File System. [ 3.562612] systemd[1]: Mounted Kernel Trace File System. [ 3.564637] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.567268] systemd[1]: [email protected]: Succeeded. [ 3.568791] systemd[1]: Finished Load Kernel Module configfs. [ 3.570769] systemd[1]: [email protected]: Succeeded. [ 3.587293] systemd[1]: Finished Load Kernel Module fuse. [ 3.602725] systemd[1]: Mounting FUSE Control File System... [ 3.609608] systemd[1]: Mounting Kernel Configuration File System... [ 3.613750] systemd[1]: Finished Restore / save the current clock. [ 3.623462] systemd[1]: [email protected]: Succeeded. [ 3.625185] systemd[1]: Finished Load Kernel Module drm. [ 3.626629] systemd[1]: Mounted FUSE Control File System. [ 3.638533] systemd[1]: Started File System Check Daemon to report status. [ 3.649081] i2c_dev: i2c /dev entries driver [ 3.651040] systemd[1]: Mounted Kernel Configuration File System. [ 3.674037] systemd[1]: Finished Load Kernel Modules. [ 3.681238] systemd[1]: Starting Apply Kernel Variables... [ 3.746558] systemd[1]: Finished Apply Kernel Variables. [ 3.810829] systemd[1]: Finished File System Check on Root Device. [ 3.818176] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.914014] systemd[1]: Started Journal Service. [ 4.001519] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 4.072623] systemd-journald[134]: Received client request to flush runtime journal. [ 4.097258] systemd-journald[134]: File /var/log/journal/d65570221b8548fbb9da81007d2a5499/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 5.148429] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 5.148999] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 5.153261] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 5.181275] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 5.369033] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.371488] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 5.371519] [vc_sm_connected_init]: start [ 5.377537] mc: Linux media interface: v0.10 [ 5.381589] [vc_sm_connected_init]: installed successfully [ 5.438570] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 5.452979] videodev: Linux video capture interface: v2.00 [ 5.482386] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.492868] bcm2835_audio bcm2835_audio: card created with 8 channels [ 5.498927] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.522883] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.529822] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 5.549511] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 5.570018] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.574470] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.585855] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 5.586373] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 5.590221] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.590272] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 5.594881] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 5.595246] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 5.595277] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.595302] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.595326] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.595348] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.596015] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 5.596057] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 5.610248] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 5.610722] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 5.610749] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 5.610767] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 5.611105] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 5.611434] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 5.611463] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 5.611488] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 5.611511] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 5.611533] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 5.611770] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 5.615080] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 5.615126] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 5.618483] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.620911] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 5.620965] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 5.627380] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.669000] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 5.674985] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.684801] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 5.711133] Registered IR keymap rc-cec [ 5.735597] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.736264] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 5.924782] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 5.934393] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 5.942311] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.963276] Registered IR keymap rc-cec [ 5.963474] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 5.963834] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1 [ 6.020510] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.057359] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 6.288788] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.288984] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 6.311404] Registered IR keymap rc-cec [ 6.311630] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.311878] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2 [ 6.345197] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.346069] usbcore: registered new interface driver brcmfmac [ 6.346325] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2 [ 6.579703] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 6.609799] Registered IR keymap rc-cec [ 6.610170] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 6.610656] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3 [ 6.645231] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.645369] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.652368] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 7.293200] random: crng init done [ 7.293221] random: 7 urandom warning(s) missed due to ratelimiting [ 7.730921] uart-pl011 fe201000.serial: no DMA platform data [ 7.957203] 8021q: 802.1Q VLAN Support v1.8 [ 7.991886] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 7.997255] Registered IR keymap rc-cec [ 8.024407] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 8.074511] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4 [ 8.116419] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 8.160762] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 8.164204] Registered IR keymap rc-cec [ 8.189872] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 8.190554] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5 [ 8.306197] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 8.307803] bcmgenet fd580000.ethernet eth0: Link is Down [ 8.335634] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 8.336182] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 8.336677] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.337125] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.337556] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.337931] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.338338] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 8.448814] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 8.449065] vc4-drm gpu: [drm] Cannot find any crtc or sizes [ 8.781700] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 11.301770] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 12.942916] systemd-journald[134]: File /var/log/journal/d65570221b8548fbb9da81007d2a5499/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 13.900577] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.900613] MAI: soc_pcm_open() failed (-19) [ 13.901648] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.901681] MAI: soc_pcm_open() failed (-19) [ 13.902646] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.902675] MAI: soc_pcm_open() failed (-19) [ 13.917693] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.917738] MAI: soc_pcm_open() failed (-19) [ 13.918364] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.918393] MAI: soc_pcm_open() failed (-19) [ 13.918873] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.918908] MAI: soc_pcm_open() failed (-19) [ 13.971317] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.971351] MAI: soc_pcm_open() failed (-19) [ 13.972460] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.972494] MAI: soc_pcm_open() failed (-19) [ 13.973525] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.973557] MAI: soc_pcm_open() failed (-19) [ 13.985664] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.985696] MAI: soc_pcm_open() failed (-19) [ 13.986025] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.986043] MAI: soc_pcm_open() failed (-19) [ 13.986328] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 13.986345] MAI: soc_pcm_open() failed (-19) [ 15.763813] Bluetooth: Core ver 2.22 [ 15.763911] NET: Registered PF_BLUETOOTH protocol family [ 15.763923] Bluetooth: HCI device and connection manager initialized [ 15.763945] Bluetooth: HCI socket layer initialized [ 15.763962] Bluetooth: L2CAP socket layer initialized [ 15.763990] Bluetooth: SCO socket layer initialized [ 15.779685] Bluetooth: HCI UART driver ver 2.3 [ 15.779707] Bluetooth: HCI UART protocol H4 registered [ 15.779797] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.781063] Bluetooth: HCI UART protocol Broadcom registered [ 16.043526] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.043539] Bluetooth: BNEP filters: protocol multicast [ 16.043552] Bluetooth: BNEP socket layer initialized [ 16.064239] NET: Registered PF_ALG protocol family [ 16.084994] cryptd: max_cpu_qlen set to 1000 [ 16.169636] Bluetooth: RFCOMM TTY layer initialized [ 16.169664] Bluetooth: RFCOMM socket layer initialized [ 16.169682] Bluetooth: RFCOMM ver 1.11 [ 31.833193] cam-dummy-reg: disabling

Additional context

No response

dty717 avatar Aug 09 '22 02:08 dty717

Which application are you trying to display these characters in:

  • Chromium web browser?
  • A Terminal window in the GUI?
  • A bare framebuffer console on the display (e.g. boot to console, or after pressing Ctrl-F1)?

For me, viewing this issue in Chromium shows the expected characters, and cutting/pasting them into Terminal also works. Only the third option, the framebuffer console, doesn't. This is expected behaviour - the virtual console only supports 256- or 512-character fonts - type showconsolefont to see which characters are available.

pelwell avatar Aug 09 '22 07:08 pelwell

Matchbox-keyboard works well in OS64, but has the problem in OS32, but I am not sure if it's the application problem.

dty717 avatar Aug 10 '22 06:08 dty717

@dty717 please check your locale settings. With:

[tux@raspberrypi ~]$ localectl
   System Locale: LANG=en_US.UTF-8
       VC Keymap: us
      X11 Layout: us

Unicode characters are being shown as expected. Sample gnome-terminal output:

rpi_unicode_sample

elsaco avatar Sep 18 '22 00:09 elsaco