raspberrypi
Asmedia ASM235CM Issue
Describe the bug
Hello
I have a USB 3.0 NATEC NKZ-0448 3.5" sata hard drive enclosure
With Asmedia ASM235CM Chipset
In a Raspberry Pi 4B 4GB rev1.4 With latest firmware/bootloader 2022-04-26
And upon using a mechanical 3.5" hard disk drive to boot from the perfomance is very poor/slow
I disabled UASP with quirks but that didn't help I changed the case USB cable and the PSU that didn't help either.
Tried many different hard drives the results were always the same
Tried another case i have that is USB 2.0 and the hard drive there worked way faster/normal even if its USB 2.0
hdparm is reporting speeds of 80/100mb/sec but the Chipset/Case is like its delaying/lagging the hdd operations the perfomance feels like 5/10mb/sec Its slower than the sdr25 card reader in previous raspberry pi models.
The same case in my windows computer works normal without delaying.
Is this a known incomparability with Asmedia ASM235CM Chipset ??
Thanks
Steps to reproduce the behaviour
.
Device (s)
Raspberry Pi 4 Mod. B
System
Raspbian Buster
Logs
lsub/lsusb -t / usb-devices info under:
raspberrypi:~ $ lsusb Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0c45:7403 Microdia Foot Switch Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub pi@raspberrypi:~ $ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 4: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 4: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M pi@raspberrypi:~ $ usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=05.10 S: Manufacturer=Linux 5.10.43v64 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:01:00.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2109 ProdID=3431 Rev=04.21 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0c45 ProdID=7403 Rev=00.01 S: Manufacturer=SONiX S: Product=USB Device C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4 D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev=05.10 S: Manufacturer=Linux 5.10.43v64 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:01:00.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=174c ProdID=55aa Rev=01.00 S: Manufacturer=ASMedia S: Product=USB 3.1 Storage Device S: SerialNumber=0000000000C7 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=0mA I: If#=0x0 Alt= 1 #EPs= 4 Cls=08(stor.) Sub=06 Prot=62 Driver=uas pi@raspberrypi:~ $
Additional context
No response
