raomin
Looking for the SG ports
First of all, what a superb project. I got connecting the ESP32 to my EHVX08S18D6V figured out by following the documentation. Thanks for developing this.
I would like to steer the device a bit too, mainly by enabling and disabling the SG ports, if possible. By looking at the labelling of the connections, I don't clearly see which ports that would be. On the right terminal I got the following connections:
On the left terminal, the labels are a bit harder to read because of all the cables in front of it, but they are labeled as follows:
Any idea what ports are linked to the SG ports?
Of course it could also be one of the other ports on the board: X42A, X32A, X85A, X38A or X33A. All suggestions are welcome.
After some googling, it looks like the S1S contact might be the benefit kWh rate power supply contact. Which, if I understand correctly, seems equivalent to the SG1 contact.
Other things I read is that only the LAN adapter will provide the extra ports.
Yup, for older models, you need the LAN adapter. But make sure to get the one with SmartGrid functionality.
