rand

I have also implemented this idea for other battery packs and inverters using the CAN485 board (private) and STM32 (public). Putting discussions behind a paywall is not great, I will...

 Why didn’t you contact me or acknowledge my code? You already know that I have the Kangoo and Zoe protocols tested, the complete Can485 hardware setup with dual can,...

Don't be coy, this isn't about one Solax protocol and you gave it away in your latest YT video. You were aware of my STM32 repo back in March 2023...

> I have the problem that my Kostal Plenticore Plus can only process the BYD battery via the RS485 interface. Unfortunately, the byd modbus that is already included in the...

I initially developed a system using the LilyGo and abandoned it. The build quality is poor, the PCB corrodes, and the ESP32 is not a good CAN performer.

It’s a 32-bit value and the config needs updating. I’ll put in a PR this evening.

Just to note, I have to make some assumptions here about the values. It would help if someone could implement this on their HA and report back. These two uint16...

Based on those values (0x00EC544F) that should be 15,488,079 Have a play with that and I'll check back in later.

Hey @StealthChesnut I'm looking at raw can logs to decipher this register. What I see is an energy counter, uint32 little endian. The specific can frame shows [.., 0x79, 0x43,...

Not particularly happy with this sensor, there appears to be some sort of arbitrary offset which I can't test for. Might be better to yank it @StealthChesnut