gbs-control
gbs-control copied to clipboard
ramapcsx2
Check his Youtube comments. Problems is due to the 100ohm resistor miss placed during the video. Right installation as shown in the pictures. 
Scaling controls in the 1920x1080 mode allow for perfect 2x or 4x integer vertical scaling via the values “VScale: 512” and “VScale: 256” respectively, with the scaling formula being “1024...
My diy gbs-c that i have just built, is not working. It is a v5.2 board with Nodemcu v2 Checked connections, theyre all fine. Nodemcu gets 5.5v too There is...
When we input the GBS via a component cable (YPBPR) from the PS2 to use HDMI output, should the "SYNC ON GREEN SELF-LOCKING BUTTON" and "RGBS SYNC SELF-LOCKING BUTTON" buttons...
If possible, it would be a great idea to add a setting to completely turn off the screen after a certain number of minutes of inactivity, re-enabling it when the...
I am attempting to use my GBS-Control as a simple RGBS to YPbPr transcoder, but only the 15KHz mode (and probably the other modes as well) display properly; when I...
Hi, Just as in title, I have mesh made of 3 access points, gbs control is unable to connect to such a network. I tried to limit the device to...
Im using ps2 with good quality component cables. Usually when the gbsc runs for an hour, and the game switches resolution (doesnt matter wich res) this happens. It doesnt matter...
No problem with PSX core on Mister, but tested Saturn lastest Unstable with Dead or Alive 704x480i and interlacing isn´t working, i don´t know if its a problem of the...
I've tried multiple things but cant quite seem to get one of the three buttons for the OLED/OSD to work. Using momentary switches (three of the ones on the GBS...
