raman325
Strange interaction on UI between Enabled switch and PIN active status
What happened?
I have 5 filled slots. let's call them Slots A, B, C D & E. They are all enabled, but PIN active status for Slot B is Off. All other slots show PIN active as On.
If I disable Slot C it makes the Slot B's PIN active status go from Off to On.
If I re-enable Slot C, it turns Slot C's PIN active to Off
This is an example, it's consistent across all slots. One slot is always inactive unless I disable it, then they are all active. When I enable any slot, it becomes inactive and makes the previously inactive slot active.
Lock function fails when a slot's PIN is inactive, and the PIN drops out of the Code Slot Sensor field. So to get all 5 slots to function, I need to disable the slot with the inactive PIN in order to make the PIN active.
Steps to reproduce the issue
As described in What happened?
Home Assistant Version
2024.5.2
What version of Lock Code Manager are you running?
0.4.6
Lock make and model
Yale Keyless Connected with z-wave module
Relevant log output
None
Screenshots
No response
Anything else?
No response
I’m travelling today, but will check tomorrow. I was also suffering from the other recent issue others were reporting but will re-install from scratch. Thanks for this integration, it’s been great - just what I need.
is this still an issue on the latest version?
I don't know.
I've tried to check but unfortunately the reinstall of the integration is not working properly. I'm just getting one device but no entities, despite the yaml code detailing more. Similar problem to the closed issue #241?
HA Core 2024.6.3 and LCM 0.5.1 Yale lock with zero-wave module