Alessio Molteni

> Pull up resistor are in the board. Did you connected VDD and GND too? Ok so.... I've tested a simple i2c scan sketch using SCL and SDA on GPIO_18...

The ADS1115 works properly with a simple sketch measuring the voltage: The Sketch: ``` #include #include Adafruit_ADS1115 ads; float Voltage = 0.0; #define SDA_PIN 1 #define SCL_PIN 18 void setup(void)...

> Not yet tested on T-Display-S3. Try to change pin combination because GPIO_NUM_1 is used also for DIN_MIDI_IN. I've changed the DIN_MIDI_IN to GPIO_17 which is empty at the moment.......

> How many pedals are configured as Analog 4? Once you have only 1 pedal as Analog 4 restart the board. Only Pedal 5.... I've got something but the I...

> Can you give a try to latest version 3.4.1? Yeah sure... meanwhile I was trying to debug the issue, I believe there is something in the refresh_analog4() that's not...

> Can you give a try to latest version 3.4.1? Ok, now it's better! I've noticed that because we would have 4 inputs, I should set the Control to Pedal...

When in hang, meaning "if I move the pedal nothing happens in the display or console", If I don't touch anything and the board does not reboot by itself, it...

Ok I had the Activity Threshold and the Ease at the lowest level to test the inputs, it's definetly too much. Now I have Ease 2 Threshold 16, and it...

I'm having some weird behaviors when I enable ANALOG 4 in the web ui... I got a board reset but I can't trace anything in the console unfortunately :( As...

@joaorodriguesjr It's expected. It's not enabled in mod-ui, yet. I've asked for this for so long, check this: https://github.com/mod-audio/mod-desktop/issues/14 I had to fix mod-ui by myself and I've created a...