Radek

Or this. 

If you have a board from BTT or MKS it is not important. You still have to adjust the configuration yourself. Downloading something compiled somewhere is not good.

Don't want to use bilinear leveling? It works great for me

> > Or this. > >  > > I didnt find this option configuration_adv.h

> > Don't want to use bilinear leveling? It works great for me > > Do you mean this one?? do i need to setup anything else for setup bilinear?...

I asked you to measure the distance of the probe from the nozzle in the X-axis and in the Y-axis. You didn't answer


You must enable the TFT serial port on the printer. You must set the same communication speed on the display as you set on the printer. The display is optimized...

oldman4U to see SD card on TFT you have to meet 2 conditions. 1. You must be connected via EXP1 and EXP2 (+ correctly declared display type and pins of...

I would not record older FW due to SD support. A better solution would be to lead the pins from the EXP2 connector (on the Marlin board) to an external...