Radek comments

Results 697 comments of


                                            Radek

rs232 with ramps/arduino need level shifter?

According to the processor specification, the pins of the serial connector are 5V tolerant.

rs232 with ramps/arduino need level shifter?

![image](https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/assets/46979052/3d7c0e64-70ad-4681-8085-5ef1656283c4) ![image](https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/assets/46979052/d5564c91-bebd-44c4-8ae8-2e52cd737e12)

Ender 3 V1 - SKR Mini E3 V2 - Does not auto power down

If you want to turn off the printer with a button on the touch screen, you must have the corresponding HW.

Hardware issue - D3 led is ON, screen is off and large chip gets burning hot

Looks like a burnt processor. You could resolder the new processor. However, there is currently no downloadable bootloader for your display (I couldn't find it). You'd have to get it...

BTT Mini 12864 incompatible with BTT SKR E3 Turbo

![image](https://user-images.githubusercontent.com/46979052/134945258-90534d17-1f05-45c4-b300-01ba177aa890.png)

BTT Mini 12864 incompatible with BTT SKR E3 Turbo

![image](https://user-images.githubusercontent.com/46979052/134945339-4daf5057-8aa7-4ef3-b157-801dda8fc941.png)

BTT Mini 12864 incompatible with BTT SKR E3 Turbo

https://github.com/bigtreetech/BGTHREETECH-MINI-12864-V1.0/blob/main/Hardware/Bigtreetech%20Mini12864%20V1.0%20User%20Manual.pdf

BTT Mini 12864 incompatible with BTT SKR E3 Turbo

look here https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/650 After modifying the pin set, configuring Marlin, and making your own patch cord, the display should work.

the tft35 v2 can't connect on skr v1.3

Submit configuration files to Marlin

the tft35 v2 can't connect on skr v1.3

Close the ticket. Please.