rboot-sample
rboot-sample copied to clipboard
Published
20 hours ago •
raburton
raburton
boot error
i flashed with
esptool.py --port /dev/cu.usbserial-A7012RPU write_flash -fs 1MB -fm dout -ff 40m 0x00000 rboot.bin 0x02000 rom0.bin 0x82000 rom1.bin 0xfc000 blank4.bin
rboot.h #define BOOT_RTC_ENABLED or //#define BOOT_RTC_ENABLED didnt make any change..
11:20:32.325 ->
11:20:32.325 -> rBoot v1.4.2 - [email protected]
11:20:32.361 -> Flash Size: 8 Mbit
11:20:32.361 -> Flash Mode: DOUT
11:20:32.361 -> Flash Speed: 40 MHz
11:20:32.361 -> rBoot Option: RTC data
11:20:32.361 ->
11:20:32.361 -> Writing default boot config.
11:20:32.461 -> Booting rom 0 at 2000, load addr 33e20.
11:20:32.809 -> rf_cal[0] !=0x05,is 0xFF
11:20:32.881 ->
11:20:32.881 -> ets Jan 8 2013,rst cause:1, boot mode:(3,7)
11:20:32.881 ->
11:20:32.881 -> load 0x40100000, len 1548, room 16
11:20:32.881 -> tail 12
11:20:32.881 -> chksum 0x69
11:20:32.881 -> ho 0 tail 12 room 4
11:20:32.881 -> load 0x3ffe8000, len 680, room 12
11:20:32.881 -> tail 12
11:20:32.881 -> chksum 0xc6
11:20:32.881 -> csum 0xc6
11:20:37.468 ->
