gluetun
gluetun copied to clipboard
Feature request: Add support for VyprVPN in a GIGANEWS Account
What's the feature 🧐
The company that owns VyprVPN also sells it via their GIGANEWS website bundled together with a Usenet service.
Currently Gluetun supports using VyprVPN only if it was purchased on vyprvpn.com. It would be useful to also enable its use for users who purchased it on giganews.com.
Extra information and references
Region names appear to be the same, but the hostnames have eu1.vpn.giganews.com
format instead of eu1.vyprvpn.com
Hey there, thanks for proposing this.
- Did you try with the current VyprVPN gluetun setup (see the wiki), what error do you get?
- Try adding
-e VPN_ENDPOINT_IP=128.90.96.17
to see if it works? (IP found withnslookup eu1.vpn.giganews.com
) - Is it the only difference? Did you compare both OpenVPN configuration files from vyprvpn.com and giganews.com? If you don't have a vyprvpn openvpn config, please share a giganews config file (and remove your username+password)
Hi. Here is the info you requested:
- Yes, I ran the following command:
docker run --cap-add NET_ADMIN -e VPN_SERVICE_PROVIDER=vyprvpn -e OPENVPN_USER=someusername -e OPENVPN_PASSWORD=somepassword qmcgaw/gluetun:latest
Part of the log output:
2022/03/07 10:49:03 INFO openvpn: library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.10
2022/03/07 10:49:03 INFO openvpn: TCP/UDP: Preserving recently used remote address: [AF_INET]209.99.93.18:443
2022/03/07 10:49:03 INFO openvpn: UDP link local: (not bound)
2022/03/07 10:49:03 INFO openvpn: UDP link remote: [AF_INET]209.99.93.18:443
2022/03/07 10:49:06 INFO openvpn: [us6.vyprvpn.com] Peer Connection Initiated with [AF_INET]209.99.93.18:443
2022/03/07 10:49:07 ERROR openvpn: AUTH: Received control message: AUTH_FAILED
Your credentials might be wrong 🤨
- I added the environment viable as follows:
docker run --cap-add NET_ADMIN -e VPN_SERVICE_PROVIDER=vyprvpn -e OPENVPN_USER=someusername -e OPENVPN_PASSWORD=somepassword -e VPN_ENDPOINT_IP=128.90.96.17 qmcgaw/gluetun:latest
Part of the log output:
2022/03/07 10:42:59 INFO openvpn: TCP/UDP: Preserving recently used remote address: [AF_INET]128.90.96.17:443
2022/03/07 10:42:59 INFO openvpn: UDP link local: (not bound)
2022/03/07 10:42:59 INFO openvpn: UDP link remote: [AF_INET]128.90.96.17:443
2022/03/07 10:43:00 INFO openvpn: [eu1.vpn.giganews.com] Peer Connection Initiated with [AF_INET]128.90.96.17:443
2022/03/07 10:43:01 INFO openvpn: TUN/TAP device tun0 opened
2022/03/07 10:43:01 INFO openvpn: /sbin/ip link set dev tun0 up mtu 1500
2022/03/07 10:43:01 INFO openvpn: /sbin/ip link set dev tun0 up
2022/03/07 10:43:01 INFO openvpn: /sbin/ip addr add dev tun0 10.2.0.21/24
2022/03/07 10:43:01 INFO openvpn: UID set to nonrootuser
2022/03/07 10:43:01 INFO openvpn: Initialization Sequence Completed
2022/03/07 10:43:01 INFO dns over tls: downloading DNS over TLS cryptographic files
2022/03/07 10:43:10 INFO dns over tls: downloading hostnames and IP block lists
2022/03/07 10:43:15 INFO dns over tls: init module 0: validator
2022/03/07 10:43:15 INFO dns over tls: init module 1: iterator
2022/03/07 10:43:15 INFO dns over tls: start of service (unbound 1.13.2).
2022/03/07 10:43:15 INFO dns over tls: generate keytag query _ta-4a5c-4f66. NULL IN
2022/03/07 10:43:15 INFO dns over tls: generate keytag query _ta-4a5c-4f66. NULL IN
2022/03/07 10:43:16 INFO dns over tls: ready
2022/03/07 10:43:16 INFO vpn: You are running on the bleeding edge of latest!
2022/03/07 10:43:16 INFO ip getter: Public IP address is 128.90.138.60 (Netherlands, North Holland, Amsterdam)
So, it works nicely.
- Unfortunately, I only have the giganews subscription that gives me vyprvpn, instead of the direct vyprvpn one, so i can't compare the two. However, I found their .ovpn config files, which can be downloaded here
- Try adding
-e VPN_ENDPOINT_IP=128.90.96.17
to see if it works? (IP found withnslookup eu1.vpn.giganews.com
)
I had the same issue, once i put in this endpoint it fixed the issue and now works. Legend.