chubby75
chubby75 copied to clipboard
q3k
Linsn RV901T HUB75 LED "Receiver Card" Reverse Engineering
I have added the support of these boards in [IceStudio](https://icestudio.io/) IceStudio is a visual editor for open FPGA boards. You can get more information in my [github](https://github.com/benitoss/ColorLight_FPGA_boards) In my Github...
Howdy. After an investigation, I have concluded that there is no user accessible pin connected to the flash SCLK. Instead, you can use the USRMCLK primitive. This worked for me:...
I ordered a 5A-75B but seller send me a E80 receiving card... https://www.colorlightinside.com/Products/i%20Receiving-series/34_133.html Do you know if they are the same pinout ?? All the JTAG pinout seems to be...
Hello, Do you have the EEPROM dump from this board and likely to share? It seems I bricked the one on my board. Thanks, Dnstje.
5A-75E V6.0
I ordered some colorlight 5A-75E and got one with V6.0. The Chips used: * 1x `LFE5U-25F 6BG381C` * 1x `25Q16CSIG` Flash * 2x `EM636165TS-6G` RAM * 2x `850612D` Ethernet *...
I think some research should be done on this board since it is RK3188 and receiving card all in one. It easily outputs all the content directly on to the...
Hi, saw this 16 port card and was wondering if anyone knew what fpga/memory was on it, its pinout, etc. It has a microcontroller and fpga according to the PDF,...
Folks, On 7.0 board, PROGRAMN appears to available on the Eastern end of R106 (the end closest to the recycle symbol). Leastways, I can pull it and have it reboot...
I did a bit of beeping-out of J25, the 20-pin unpopulated 0.1inch header between the ethernet magnetics and the ethernet connectors. Unsurprisingly, it duplicates the rj45 connectors, and does nothing...
