pylint
pylint copied to clipboard
Published
20 hours ago •
pylint-dev
pylint-dev
pylint --generate-toml-config was incorrect on PyCQA/astroid
Bug description
In PyCQA/astroid#1793, I ran pylint --generate-toml-config but then two pylint tests failed. To get them to pass, I had to add disable = ["bad-builtin", "useless-suppression"].
Configuration
No response
Command used
`pylint --generate-toml-config`
Pylint output
Profile not explicitly set, using 'best_effort'.
➜ astroid git:(pylint-config-in-pyproject.toml_again) ✗ code *.toml
➜ astroid git:(pylint-config-in-pyproject.toml_again) ✗ rm junk.py
rm: junk.py: No such file or directory
➜ astroid git:(pylint-config-in-pyproject.toml_again) ✗ rm junk.toml
➜ astroid git:(pylint-config-in-pyproject.toml_again) ✗ code .pre-commit-config.yaml
➜ astroid git:(pylint-config-in-pyproject.toml_again) ✗ git rm pylintrc
rm 'pylintrc'
➜ astroid git:(pylint-config-in-pyproject.toml_again) ✗ git commit -am"Use ini2toml to move pylint config into pyproject.toml"
trim trailing whitespace.................................................Passed
fix end of files.........................................................Passed
autoflake............................................(no files to check)Skipped
copyright-notice.....................................(no files to check)Skipped
pyupgrade............................................(no files to check)Skipped
isort................................................(no files to check)Skipped
black-disable-checker................................(no files to check)Skipped
black................................................(no files to check)Skipped
flake8...............................................(no files to check)Skipped
pylint...............................................(no files to check)Skipped
mypy.................................................(no files to check)Skipped
prettier.................................................................Passed
[pylint-config-in-pyproject.toml_again 5aad054a] Use ini2toml to move pylint config into pyproject.toml
3 files changed, 275 insertions(+), 370 deletions(-)
delete mode 100644 pylintrc
➜ astroid git:(pylint-config-in-pyproject.toml_again) git push
Enumerating objects: 7, done.
Counting objects: 100% (7/7), done.
Delta compression using up to 8 threads
Compressing objects: 100% (4/4), done.
Writing objects: 100% (4/4), 5.74 KiB | 5.74 MiB/s, done.
Total 4 (delta 2), reused 0 (delta 0), pack-reused 0
remote: Resolving deltas: 100% (2/2), completed with 2 local objects.
remote:
remote: Create a pull request for 'pylint-config-in-pyproject.toml_again' on GitHub by visiting:
remote: https://github.com/cclauss/astroid/pull/new/pylint-config-in-pyproject.toml_again
remote:
To https://github.com/cclauss/astroid
* [new branch] pylint-config-in-pyproject.toml_again -> pylint-config-in-pyproject.toml_again
branch 'pylint-config-in-pyproject.toml_again' set up to track 'origin/pylint-config-in-pyproject.toml_again'.
➜ astroid git:(pylint-config-in-pyproject.toml_again) validate-pyproject pyproject.toml
Valid file: pyproject.toml
➜ astroid git:(pylint-config-in-pyproject.toml_again) code .pre-commit-config.yaml
➜ astroid git:(pylint-config-in-pyproject.toml_again) code pyproject.toml
➜ astroid git:(pylint-config-in-pyproject.toml_again) git commit -am"Use ini2toml to move pylint config into pyproject.toml"
trim trailing whitespace.................................................Passed
fix end of files.........................................................Passed
autoflake............................................(no files to check)Skipped
copyright-notice.....................................(no files to check)Skipped
pyupgrade............................................(no files to check)Skipped
isort................................................(no files to check)Skipped
black-disable-checker................................(no files to check)Skipped
black................................................(no files to check)Skipped
flake8...............................................(no files to check)Skipped
pylint...............................................(no files to check)Skipped
mypy.................................................(no files to check)Skipped
prettier.................................................................Passed
[pylint-config-in-pyproject.toml_again a9a9c9d4] Use ini2toml to move pylint config into pyproject.toml
1 file changed, 1 insertion(+), 1 deletion(-)
➜ astroid git:(pylint-config-in-pyproject.toml_again) git push
Enumerating objects: 5, done.
Counting objects: 100% (5/5), done.
Delta compression using up to 8 threads
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 330 bytes | 330.00 KiB/s, done.
Total 3 (delta 2), reused 0 (delta 0), pack-reused 0
remote: Resolving deltas: 100% (2/2), completed with 2 local objects.
To https://github.com/cclauss/astroid
5aad054a..a9a9c9d4 pylint-config-in-pyproject.toml_again -> pylint-config-in-pyproject.toml_again
➜ astroid git:(pylint-config-in-pyproject.toml_again) code pyproject.toml
➜ astroid git:(pylint-config-in-pyproject.toml_again) git commit -am"Use ini2toml to move pylint config into pyproject.toml"
trim trailing whitespace.................................................Passed
fix end of files.........................................................Passed
autoflake............................................(no files to check)Skipped
copyright-notice.....................................(no files to check)Skipped
pyupgrade............................................(no files to check)Skipped
isort................................................(no files to check)Skipped
black-disable-checker................................(no files to check)Skipped
black................................................(no files to check)Skipped
flake8...............................................(no files to check)Skipped
pylint...............................................(no files to check)Skipped
mypy.................................................(no files to check)Skipped
prettier.................................................................Passed
[pylint-config-in-pyproject.toml_again b4951639] Use ini2toml to move pylint config into pyproject.toml
1 file changed, 1 insertion(+), 1 deletion(-)
➜ astroid git:(pylint-config-in-pyproject.toml_again) git push
Enumerating objects: 5, done.
Counting objects: 100% (5/5), done.
Delta compression using up to 8 threads
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 338 bytes | 338.00 KiB/s, done.
Total 3 (delta 2), reused 0 (delta 0), pack-reused 0
remote: Resolving deltas: 100% (2/2), completed with 2 local objects.
To https://github.com/cclauss/astroid
a9a9c9d4..b4951639 pylint-config-in-pyproject.toml_again -> pylint-config-in-pyproject.toml_again
➜ astroid git:(pylint-config-in-pyproject.toml_again) mainupp
Switched to branch 'main'
Your branch is up to date with 'origin/main'.
From https://github.com/PyCQA/astroid
* branch main -> FETCH_HEAD
Already up to date.
Everything up-to-date
* main
max-complexity-and-max-line-length
more-pyproject.toml
pylint-config-in-pyproject.toml
pylint-config-in-pyproject.toml_again
➜ astroid git:(main) mainup
Already on 'main'
Your branch is up to date with 'origin/main'.
From https://github.com/PyCQA/astroid
* branch main -> FETCH_HEAD
Already up to date.
Everything up-to-date
* main
max-complexity-and-max-line-length
more-pyproject.toml
pylint-config-in-pyproject.toml
pylint-config-in-pyproject.toml_again
➜ astroid git:(main) git checkout pylint-config-in-pyproject.toml
Switched to branch 'pylint-config-in-pyproject.toml'
Your branch is up to date with 'origin/pylint-config-in-pyproject.toml'.
➜ astroid git:(pylint-config-in-pyproject.toml) git checkout main -- pylintrc
➜ astroid git:(pylint-config-in-pyproject.toml) ✗ pylint --rcfile pylintrc --generate-toml-config
[tool.pylint.main]
# Analyse import fallback blocks. This can be used to support both Python 2 and 3
# compatible code, which means that the block might have code that exists only in
# one or another interpreter, leading to false positives when analysed.
# analyse-fallback-blocks =
# Always return a 0 (non-error) status code, even if lint errors are found. This
# is primarily useful in continuous integration scripts.
# exit-zero =
# A comma-separated list of package or module names from where C extensions may
# be loaded. Extensions are loading into the active Python interpreter and may
# run arbitrary code.
# extension-pkg-allow-list =
# A comma-separated list of package or module names from where C extensions may
# be loaded. Extensions are loading into the active Python interpreter and may
# run arbitrary code. (This is an alternative name to extension-pkg-allow-list
# for backward compatibility.)
# extension-pkg-whitelist =
# Return non-zero exit code if any of these messages/categories are detected,
# even if score is above --fail-under value. Syntax same as enable. Messages
# specified are enabled, while categories only check already-enabled messages.
# fail-on =
# Specify a score threshold under which the program will exit with error.
fail-under = 10
# Interpret the stdin as a python script, whose filename needs to be passed as
# the module_or_package argument.
# from-stdin =
# Files or directories to be skipped. They should be base names, not paths.
ignore = ["CVS"]
# Add files or directories matching the regular expressions patterns to the
# ignore-list. The regex matches against paths and can be in Posix or Windows
# format. Because '\' represents the directory delimiter on Windows systems, it
# can't be used as an escape character.
# ignore-paths =
# Files or directories matching the regular expression patterns are skipped. The
# regex matches against base names, not paths. The default value ignores Emacs
# file locks
ignore-patterns = ["^\\.#"]
# List of module names for which member attributes should not be checked (useful
# for modules/projects where namespaces are manipulated during runtime and thus
# existing member attributes cannot be deduced by static analysis). It supports
# qualified module names, as well as Unix pattern matching.
ignored-modules = ["typed_ast.ast3"]
# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
# init-hook =
# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
# number of processors available to use, and will cap the count on Windows to
# avoid hangs.
jobs = 1
# Control the amount of potential inferred values when inferring a single object.
# This can help the performance when dealing with large functions or complex,
# nested conditions.
limit-inference-results = 100
# List of plugins (as comma separated values of python module names) to load,
# usually to register additional checkers.
load-plugins = ["pylint.extensions.check_elif", "pylint.extensions.bad_builtin", "pylint.extensions.code_style", "pylint.extensions.overlapping_exceptions", "pylint.extensions.typing", "pylint.extensions.code_style", "pylint.extensions.set_membership", "pylint.extensions.redefined_variable_type", "pylint.extensions.for_any_all"]
# Pickle collected data for later comparisons.
persistent = true
# Minimum Python version to use for version dependent checks. Will default to the
# version used to run pylint.
py-version = "3.7.2"
# Discover python modules and packages in the file system subtree.
# recursive =
# When enabled, pylint would attempt to guess common misconfiguration and emit
# user-friendly hints instead of false-positive error messages.
suggestion-mode = true
# Allow loading of arbitrary C extensions. Extensions are imported into the
# active Python interpreter and may run arbitrary code.
# unsafe-load-any-extension =
[tool.pylint.basic]
# Naming style matching correct argument names.
argument-naming-style = "snake_case"
# Regular expression matching correct argument names. Overrides argument-naming-
# style. If left empty, argument names will be checked with the set naming style.
argument-rgx = "[a-z_][a-z0-9_]{2,30}$"
# Naming style matching correct attribute names.
attr-naming-style = "snake_case"
# Regular expression matching correct attribute names. Overrides attr-naming-
# style. If left empty, attribute names will be checked with the set naming
# style.
attr-rgx = "[a-z_][a-z0-9_]{2,30}$"
# Bad variable names which should always be refused, separated by a comma.
bad-names = ["foo", "bar", "baz", "toto", "tutu", "tata"]
# Bad variable names regexes, separated by a comma. If names match any regex,
# they will always be refused
# bad-names-rgxs =
# Naming style matching correct class attribute names.
class-attribute-naming-style = "any"
# Regular expression matching correct class attribute names. Overrides class-
# attribute-naming-style. If left empty, class attribute names will be checked
# with the set naming style.
class-attribute-rgx = "([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$"
# Naming style matching correct class constant names.
class-const-naming-style = "UPPER_CASE"
# Regular expression matching correct class constant names. Overrides class-
# const-naming-style. If left empty, class constant names will be checked with
# the set naming style.
# class-const-rgx =
# Naming style matching correct class names.
class-naming-style = "PascalCase"
# Regular expression matching correct class names. Overrides class-naming-style.
# If left empty, class names will be checked with the set naming style.
class-rgx = "[A-Z_][a-zA-Z0-9]+$"
# Naming style matching correct constant names.
const-naming-style = "UPPER_CASE"
# Regular expression matching correct constant names. Overrides const-naming-
# style. If left empty, constant names will be checked with the set naming style.
const-rgx = "(([A-Z_][A-Z0-9_]*)|(__.*__))$"
# Minimum line length for functions/classes that require docstrings, shorter ones
# are exempt.
docstring-min-length = -1
# Naming style matching correct function names.
function-naming-style = "snake_case"
# Regular expression matching correct function names. Overrides function-naming-
# style. If left empty, function names will be checked with the set naming style.
function-rgx = "[a-z_][a-z0-9_]{2,30}$"
# Good variable names which should always be accepted, separated by a comma.
good-names = ["i", "j", "k", "e", "ex", "f", "m", "cm", "Run", "_", "n", "op", "it"]
# Good variable names regexes, separated by a comma. If names match any regex,
# they will always be accepted
# good-names-rgxs =
# Include a hint for the correct naming format with invalid-name.
# include-naming-hint =
# Naming style matching correct inline iteration names.
inlinevar-naming-style = "any"
# Regular expression matching correct inline iteration names. Overrides
# inlinevar-naming-style. If left empty, inline iteration names will be checked
# with the set naming style.
inlinevar-rgx = "[A-Za-z_][A-Za-z0-9_]*$"
# Naming style matching correct method names.
method-naming-style = "snake_case"
# Regular expression matching correct method names. Overrides method-naming-
# style. If left empty, method names will be checked with the set naming style.
method-rgx = "[a-z_][a-z0-9_]{2,30}$"
# Naming style matching correct module names.
module-naming-style = "snake_case"
# Regular expression matching correct module names. Overrides module-naming-
# style. If left empty, module names will be checked with the set naming style.
module-rgx = "(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$"
# Colon-delimited sets of names that determine each other's naming style when the
# name regexes allow several styles.
# name-group =
# Regular expression which should only match function or class names that do not
# require a docstring.
no-docstring-rgx = "__.*__"
# List of decorators that produce properties, such as abc.abstractproperty. Add
# to this list to register other decorators that produce valid properties. These
# decorators are taken in consideration only for invalid-name.
property-classes = ["abc.abstractproperty"]
# Regular expression matching correct type variable names. If left empty, type
# variable names will be checked with the set naming style.
# typevar-rgx =
# Naming style matching correct variable names.
variable-naming-style = "snake_case"
# Regular expression matching correct variable names. Overrides variable-naming-
# style. If left empty, variable names will be checked with the set naming style.
variable-rgx = "[a-z_][a-z0-9_]{2,30}$"
[tool.pylint.classes]
# Warn about protected attribute access inside special methods
# check-protected-access-in-special-methods =
# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods = ["__init__", "__new__", "setUp"]
# List of member names, which should be excluded from the protected access
# warning.
exclude-protected = ["_asdict", "_fields", "_replace", "_source", "_make"]
# List of valid names for the first argument in a class method.
valid-classmethod-first-arg = ["cls"]
# List of valid names for the first argument in a metaclass class method.
valid-metaclass-classmethod-first-arg = ["mcs"]
[tool.pylint.code_style]
# Max line length for which to sill emit suggestions. Used to prevent optional
# suggestions which would get split by a code formatter (e.g., black). Will
# default to the setting for ``max-line-length``.
# max-line-length-suggestions =
[tool.pylint.deprecated_builtins]
# List of builtins function names that should not be used, separated by a comma
# bad-functions =
[tool.pylint.design]
# List of regular expressions of class ancestor names to ignore when counting
# public methods (see R0903)
# exclude-too-few-public-methods =
# List of qualified class names to ignore when counting class parents (see R0901)
# ignored-parents =
# Maximum number of arguments for function / method.
max-args = 10
# Maximum number of attributes for a class (see R0902).
max-attributes = 15
# Maximum number of boolean expressions in an if statement (see R0916).
max-bool-expr = 5
# Maximum number of branch for function / method body.
max-branches = 25
# Maximum number of locals for function / method body.
max-locals = 25
# Maximum number of parents for a class (see R0901).
max-parents = 10
# Maximum number of public methods for a class (see R0904).
max-public-methods = 20
# Maximum number of return / yield for function / method body.
max-returns = 10
# Maximum number of statements in function / method body.
max-statements = 60
# Minimum number of public methods for a class (see R0903).
min-public-methods = 2
[tool.pylint.exceptions]
# Exceptions that will emit a warning when caught.
overgeneral-exceptions = ["Exception"]
[tool.pylint.format]
# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
# expected-line-ending-format =
# Regexp for a line that is allowed to be longer than the limit.
ignore-long-lines = "^\\s*(# )?<?https?://\\S+>?$"
# Number of spaces of indent required inside a hanging or continued line.
indent-after-paren = 4
# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
# tab).
indent-string = " "
# Maximum number of characters on a single line.
max-line-length = 100
# Maximum number of lines in a module.
max-module-lines = 3000
# Allow the body of a class to be on the same line as the declaration if body
# contains single statement.
# single-line-class-stmt =
# Allow the body of an if to be on the same line as the test if there is no else.
# single-line-if-stmt =
[tool.pylint.imports]
# List of modules that can be imported at any level, not just the top level one.
# allow-any-import-level =
# Allow wildcard imports from modules that define __all__.
# allow-wildcard-with-all =
# Deprecated modules which should not be used, separated by a comma.
deprecated-modules = ["stringprep", "optparse"]
# Output a graph (.gv or any supported image format) of external dependencies to
# the given file (report RP0402 must not be disabled).
# ext-import-graph =
# Output a graph (.gv or any supported image format) of all (i.e. internal and
# external) dependencies to the given file (report RP0402 must not be disabled).
# import-graph =
# Output a graph (.gv or any supported image format) of internal dependencies to
# the given file (report RP0402 must not be disabled).
# int-import-graph =
# Force import order to recognize a module as part of the standard compatibility
# libraries.
# known-standard-library =
# Force import order to recognize a module as part of a third party library.
known-third-party = ["enchant"]
# Couples of modules and preferred modules, separated by a comma.
# preferred-modules =
[tool.pylint.logging]
# The type of string formatting that logging methods do. `old` means using %
# formatting, `new` is for `{}` formatting.
logging-format-style = "old"
# Logging modules to check that the string format arguments are in logging
# function parameter format.
logging-modules = ["logging"]
[tool.pylint."messages control"]
# Only show warnings with the listed confidence levels. Leave empty to show all.
# Valid levels: HIGH, CONTROL_FLOW, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
confidence = ["HIGH", "CONTROL_FLOW", "INFERENCE", "INFERENCE_FAILURE", "UNDEFINED"]
# Disable the message, report, category or checker with the given id(s). You can
# either give multiple identifiers separated by comma (,) or put this option
# multiple times (only on the command line, not in the configuration file where
# it should appear only once). You can also use "--disable=all" to disable
# everything first and then re-enable specific checks. For example, if you want
# to run only the similarities checker, you can use "--disable=all
# --enable=similarities". If you want to run only the classes checker, but have
# no Warning level messages displayed, use "--disable=all --enable=classes
# --disable=W".
disable = ["raw-checker-failed", "bad-inline-option", "locally-disabled", "file-ignored", "suppressed-message", "deprecated-pragma", "use-symbolic-message-instead", "fixme", "invalid-name", "missing-module-docstring", "missing-class-docstring", "missing-function-docstring", "too-few-public-methods", "too-many-public-methods", "too-many-boolean-expressions", "too-many-branches", "too-many-statements", "cyclic-import", "protected-access", "unused-argument", "line-too-long", "too-many-lines", "trailing-whitespace", "missing-final-newline", "trailing-newlines", "bad-indentation", "unnecessary-semicolon", "multiple-statements", "superfluous-parens", "mixed-line-endings", "unexpected-line-ending-format", "useless-option-value", "unknown-option-value", "duplicate-code", "consider-using-f-string"]
# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time (only on the command line, not in the configuration file where it
# should appear only once). See also the "--disable" option for examples.
enable = ["useless-suppression", "c-extension-no-member"]
[tool.pylint.method_args]
# List of qualified names (i.e., library.method) which require a timeout
# parameter e.g. 'requests.api.get,requests.api.post'
timeout-methods = ["requests.api.delete", "requests.api.get", "requests.api.head", "requests.api.options", "requests.api.patch", "requests.api.post", "requests.api.put", "requests.api.request"]
[tool.pylint.miscellaneous]
# List of note tags to take in consideration, separated by a comma.
notes = ["FIXME", "XXX", "TODO"]
# Regular expression of note tags to take in consideration.
# notes-rgx =
[tool.pylint.refactoring]
# Maximum number of nested blocks for function / method body
max-nested-blocks = 5
# Complete name of functions that never returns. When checking for inconsistent-
# return-statements if a never returning function is called then it will be
# considered as an explicit return statement and no message will be printed.
never-returning-functions = ["sys.exit", "argparse.parse_error"]
[tool.pylint.reports]
# Python expression which should return a score less than or equal to 10. You
# have access to the variables 'fatal', 'error', 'warning', 'refactor',
# 'convention', and 'info' which contain the number of messages in each category,
# as well as 'statement' which is the total number of statements analyzed. This
# score is used by the global evaluation report (RP0004).
evaluation = "10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)"
# Template used to display messages. This is a python new-style format string
# used to format the message information. See doc for all details.
# msg-template =
# Set the output format. Available formats are text, parseable, colorized, json
# and msvs (visual studio). You can also give a reporter class, e.g.
# mypackage.mymodule.MyReporterClass.
# output-format =
# Tells whether to display a full report or only the messages.
# reports =
# Activate the evaluation score.
score = true
[tool.pylint.similarities]
# Comments are removed from the similarity computation
ignore-comments = true
# Docstrings are removed from the similarity computation
ignore-docstrings = true
# Imports are removed from the similarity computation
ignore-imports = true
# Signatures are removed from the similarity computation
ignore-signatures = true
# Minimum lines number of a similarity.
min-similarity-lines = 4
[tool.pylint.spelling]
# Limits count of emitted suggestions for spelling mistakes.
max-spelling-suggestions = 4
# Spelling dictionary name. Available dictionaries: none. To make it work,
# install the 'python-enchant' package.
# spelling-dict =
# List of comma separated words that should be considered directives if they
# appear at the beginning of a comment and should not be checked.
spelling-ignore-comment-directives = "fmt: on,fmt: off,noqa:,noqa,nosec,isort:skip,mypy:"
# List of comma separated words that should not be checked.
# spelling-ignore-words =
# A path to a file that contains the private dictionary; one word per line.
# spelling-private-dict-file =
# Tells whether to store unknown words to the private dictionary (see the
# --spelling-private-dict-file option) instead of raising a message.
# spelling-store-unknown-words =
[tool.pylint.string]
# This flag controls whether inconsistent-quotes generates a warning when the
# character used as a quote delimiter is used inconsistently within a module.
# check-quote-consistency =
# This flag controls whether the implicit-str-concat should generate a warning on
# implicit string concatenation in sequences defined over several lines.
# check-str-concat-over-line-jumps =
[tool.pylint.typecheck]
# List of decorators that produce context managers, such as
# contextlib.contextmanager. Add to this list to register other decorators that
# produce valid context managers.
contextmanager-decorators = ["contextlib.contextmanager"]
# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E1101 when accessed. Python regular
# expressions are accepted.
generated-members = "REQUEST,acl_users,aq_parent,argparse.Namespace,ast\\.([mM]atch.*|pattern)"
# Tells whether missing members accessed in mixin class should be ignored. A
# class is considered mixin if its name matches the mixin-class-rgx option.
# Tells whether to warn about missing members when the owner of the attribute is
# inferred to be None.
ignore-none = true
# This flag controls whether pylint should warn about no-member and similar
# checks whenever an opaque object is returned when inferring. The inference can
# return multiple potential results while evaluating a Python object, but some
# branches might not be evaluated, which results in partial inference. In that
# case, it might be useful to still emit no-member and other checks for the rest
# of the inferred objects.
# ignore-on-opaque-inference =
# List of symbolic message names to ignore for Mixin members.
ignored-checks-for-mixins = ["no-member", "not-async-context-manager", "not-context-manager", "attribute-defined-outside-init"]
# List of class names for which member attributes should not be checked (useful
# for classes with dynamically set attributes). This supports the use of
# qualified names.
ignored-classes = ["SQLObject"]
# Show a hint with possible names when a member name was not found. The aspect of
# finding the hint is based on edit distance.
missing-member-hint = true
# The minimum edit distance a name should have in order to be considered a
# similar match for a missing member name.
missing-member-hint-distance = 1
# The total number of similar names that should be taken in consideration when
# showing a hint for a missing member.
missing-member-max-choices = 1
# Regex pattern to define which classes are considered mixins.
mixin-class-rgx = ".*Mix[Ii]n"
# List of decorators that change the signature of a decorated function.
# signature-mutators =
[tool.pylint.typing]
# Set to ``no`` if the app / library does **NOT** need to support runtime
# introspection of type annotations. If you use type annotations **exclusively**
# for type checking of an application, you're probably fine. For libraries,
# evaluate if some users want to access the type hints at runtime first, e.g.,
# through ``typing.get_type_hints``. Applies to Python versions 3.7 - 3.9
# runtime-typing =
[tool.pylint.variables]
# List of additional names supposed to be defined in builtins. Remember that you
# should avoid defining new builtins when possible.
# additional-builtins =
# Tells whether unused global variables should be treated as a violation.
allow-global-unused-variables = true
# List of names allowed to shadow builtins
# allowed-redefined-builtins =
# List of strings which can identify a callback function by name. A callback name
# must start or end with one of those strings.
callbacks = ["cb_", "_cb"]
# A regular expression matching the name of dummy variables (i.e. expected to not
# be used).
dummy-variables-rgx = "_$|dummy"
# Argument names that match this expression will be ignored.
ignored-argument-names = "_.*"
# Tells whether we should check for unused import in __init__ files.
# init-import =
# List of qualified module names which can have objects that can redefine
# builtins.
redefining-builtins-modules = ["six.moves", "past.builtins", "future.builtins", "builtins", "io"]
Expected behavior
plint passes on GitHub Action Check
Pylint version
Current
OS / Environment
GitHub Actions Linux
Additional dependencies
No response
