YubiGuard
YubiGuard copied to clipboard
No appindicator and blocking of YK on F26
Hi,
I am on Fedora 26 (4.12.8-300.fc26.x86_64
) with Wayland and a Yubikey 4 Nano (firmware 4.2.8). When I run YubiGuard.py
, I get:
➜ YubiGuard git:(master) ✗ ./YubiGuard.py
Starting YubiGuard.
ZMQ listener started
but when I press my Yubikey, I still get an OTP. This is of course without running YubiGuard.py -t
following running YubiGuard.py
.
I think it might have something to do with the fact that my Yubikey doesn't show up on xinput
:
➜ YubiGuard git:(master) ✗ xinput --list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ xwayland-pointer:13 id=6 [slave pointer (2)]
⎜ ↳ xwayland-relative-pointer:13 id=7 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ xwayland-keyboard:13 id=8 [slave keyboard (3)]
whereas if I ask libinput
:
➜ YubiGuard git:(master) ✗ libinput list-devices
...
Device: Yubico Yubikey 4 OTP+U2F+CCID
Kernel: /dev/input/event4
Group: 1
Seat: seat0, default
Capabilities: keyboard
Tap-to-click: n/a
Tap-and-drag: n/a
Tap drag lock: n/a
Left-handed: n/a
Nat.scrolling: n/a
Middle emulation: n/a
Calibration: n/a
Scroll methods: none
Click methods: none
Disable-w-typing: n/a
Accel profiles: n/a
Rotation: n/a
I see my Yubikey. I think xinput
has been deprecated in favour of libinput
in the switch from X to Wayland. But in your README, you state that you have tested with Fedora 26, so maybe the problem lies elsewhere (Wayland should be running by default under F26, but it may have been automatically disabled because of hardware?)
Is the problem something else or does support for libinput
need to be added?
I'm also no getting any app indicator. Some more debug information below:
Thanks, Justin
➜ YubiGuard git:(master) ✗ echo $XDG_SESSION_TYPE
wayland
➜ YubiGuard git:(master) ✗ rpm -qa | grep libappindicator
libappindicator-gtk3-12.10.0-14.fc26.x86_64
libappindicator-sharp-12.10.0-14.fc26.x86_64
libappindicator-12.10.0-14.fc26.x86_64
➜ YubiGuard git:(master) ✗ pip show pyzmq
Name: pyzmq
Version: 16.0.2
Summary: Python bindings for 0MQ
Home-page: https://pyzmq.readthedocs.org
Author: Brian E. Granger, Min Ragan-Kelley
Author-email: [email protected]
License: LGPL+BSD
Location: /usr/lib64/python2.7/site-packages
Requires:
@cjustin88 Thanks for letting me know. The readme states Fedora 24 only.
Maybe it is necessary to include some check whether YubiGuard is working correctly.
I am not going to fix the issue on Fedora 26, as I have no experience with this distribution. Still, I am open to quality pull requests in this regard.
I opened an issue in this regard and updated the compatibility list in the README.
Closed.
OK, I am looking into how to disable a device with libinput
in a way similar to xinput --set-int-prop
that YubiGuard is doing.
That is really good! Just post here if you need any assistance or have any question.