support icon indicating copy to clipboard operation
support copied to clipboard
verified publisher icon pybricks

# Manually installing USB driver in Windows

Open paulusBos opened this issue 1 year ago • 4 comments

Manually installing USB driver in Windows

As describe above, if you see a warning sign in the Device Manager next to Lego Group LEGO Technic Large Hub in DFU Mode like this, then you need to manually install the USB driver for this device.

image

  1. Double-click the device to open the Properties page.

    image

  2. Go to the Drivers tab and click the Update Driver button.

    image

  3. Select Browse my computer for drivers.

    image

  4. Select Let me pick from a list of available drivers on my computer.

    image

  5. Select Universal Serial Bus devices and then click Next.

    image

  6. Select WinUsb Device under Manufacturer and again under Model then click Next.

    image

  7. Accept the warning by clicking Yes (we have verified that the driver is compatible).

    image

  8. The driver should successfully install and you can click Close.

    image

Originally posted by @dlech in https://github.com/pybricks/support/discussions/688#discussioncomment-3201466

paulusBos avatar Mar 13 '24 13:03 paulusBos

@paulusBos - thanks for asking!

I can’t seem to find your post with the question anymore. Were you able to find it?

What was the solution? Others might have the same question. Thanks!

laurensvalk avatar Mar 13 '24 15:03 laurensvalk

2024-03-13_14-46-58

was looking for the correct WinUsb device but startted wrong (Windows in Dutch language)

paulusBos avatar Mar 13 '24 15:03 paulusBos

Thank you. In which category did you find it eventually? (fabrikant en model)

laurensvalk avatar Mar 13 '24 17:03 laurensvalk