pwn20wndstuff
Screen Unresponsive after JB - an update
Describe the bug
iPhone 7 would have an unresponsive Touch screen immediately after a successful jailbreak with Unc0ver 5.0.0/5.0.1 however power and home buttons would continue to work, upon rebooting into non JB state everything was fine again. Checkra1n did not introduce this problem.
This was the case initially on iOS 12.4 then I upgraded to iOS 13.5 (first from backup and then from a fresh restore idevicerestore -l -e).
On iOS 12.4 unc0ver 3.8.0b1 worked fine and on both 12.4 and 13.5 checkra1n worked fine.
My battery was in “service” mode (could not read cycles or battery health and my screen was 3rd party with a slight crack, but this was not affecting the operation.
I’ve just had the battery changed and the screen changed In the repair shop and now uncover 5.0.1 works fine (touch screen Doesn’t hang after JB) on iOS 13.5
To reiterate this bug was unique to unc0ver 5.0.x and was not indicative of an otherwise faulty digitiser (although the screen was third party) as it was working with checkra1n on 13.5 and was working with unc0ver 3.8.0b1 on 12.4 and working in a non JB state.
I had tried every combination of resetting all settings and restoring with iTunes, succsssion, idevicerestore Previously.
In summary, there must be a scenario whereby either certain 3rd party screen or 3rd party batteries or batteries that are In the “service” mode are incompatible with unc0ver 5.0.x. I can say this because the only difference between before (phone works not JB, but touch doesn’t work after JB) and now (everything works fine) is having my screeen and battery changed. I tried EVERYTHING from a software perspective before this with no luck.
There are other bug reports of similar problems with the touch screen becoming unresponsive further down the tracker.
To Reproduce Steps to reproduce the behavior:
Install andrun Unc0ver 5.0.x as per instructions (altserver method)
Device (please complete the following information):
- iOS Version: 13.5 and 12.4
- iOS Device: iPhone 7 (9,3)
- unc0ver Version: 5.0.0 and 5.0.1
Place an "x" between the brackets if true:
- [ ] this is a bug others will be able to reproduce
- [ X ] this issue is present with all tweaks uninstalled(except for default packages) or disabled
- [ X ] this issue is present after a rootfs restore
- [ X ] this issue is present on the latest version of unc0ver
Logs If applicable, add logs or error messages here.
No logs retained but no errors reported
I have the exact same problem with unc0ver v5.3.1 with iOS 13.5 , but with Ip7+ and only 3rd party screen
Same issue different phone Ios 13.5 on iphone 8 with third party screen. After jailbreak the screen becomes unresponsive with Unc0ver 5.3.1 and 5.0.1
I'm afraid I have the same problem.
iPhone 7, iOS 13.5, unc0ver 6.1.2
Had a third party display and everything worked perfectly. Installed a new third party display yesterday: touch became unresponsive when jailbroken.
Run out of ideas to try and fix it: did anyone succeed in solving the problem?
#1903 Describe the bug
iPhone 7 would have an unresponsive Touch screen immediately after a successful jailbreak with Unc0ver 5.0.0/5.0.1 however power and home buttons would continue to work, upon rebooting into non JB state everything was fine again. Checkra1n did not introduce this problem.
This was the case initially on iOS 12.4 then I upgraded to iOS 13.5 (first from backup and then from a fresh restore idevicerestore -l -e).
On iOS 12.4 unc0ver 3.8.0b1 worked fine and on both 12.4 and 13.5 checkra1n worked fine.
My battery was in “service” mode (could not read cycles or battery health and my screen was 3rd party with a slight crack, but this was not affecting the operation.
I’ve just had the battery changed and the screen changed In the repair shop and now uncover 5.0.1 works fine (touch screen Doesn’t hang after JB) on iOS 13.5
To reiterate this bug was unique to unc0ver 5.0.x and was not indicative of an otherwise faulty digitiser (although the screen was third party) as it was working with checkra1n on 13.5 and was working with unc0ver 3.8.0b1 on 12.4 and working in a non JB state.
I had tried every combination of resetting all settings and restoring with iTunes, succsssion, idevicerestore Previously.
In summary, there must be a scenario whereby either certain 3rd party screen or 3rd party batteries or batteries that are In the “service” mode are incompatible with unc0ver 5.0.x. I can say this because the only difference between before (phone works not JB, but touch doesn’t work after JB) and now (everything works fine) is having my screeen and battery changed. I tried EVERYTHING from a software perspective before this with no luck.
There are other bug reports of similar problems with the touch screen becoming unresponsive further down the tracker.
To Reproduce Steps to reproduce the behavior:
Install andrun Unc0ver 5.0.x as per instructions (altserver method)
Device (please complete the following information):
- iOS Version: 13.5 and 12.4
- iOS Device: iPhone 7 (9,3)
- unc0ver Version: 5.0.0 and 5.0.1
Place an "x" between the brackets if true:
- [ ] this is a bug others will be able to reproduce
- [ X ] this issue is present with all tweaks uninstalled(except for default packages) or disabled
- [ X ] this issue is present after a rootfs restore
- [ X ] this issue is present on the latest version of unc0ver
Logs If applicable, add logs or error messages here.
No logs retained but no errors reported
#2265
