Victor
Work "Mija-Temp" with original firmware (Xiaomi). In a month, it will plant a battery.   Makes a lot of connection and no adaptation "connection delay"....
The Xiaomi Mijia Gateway 3 behaves almost the same, but it establishes connections every 10 minutes or/and when opening Xiaomi apps. The battery with Xiaomi will not last even a...
Consumption in connection mode for any custom firmware "ATC_xxx":  (Custom firmware has RF TX Power more than Xiaomi) There is no difference consumption in connected state and advertising mode....
> I'm the developer of the app. I had also noticed the too much connections and have fixed it in the v2.4.3. And who will fix the 'Connection latency'?
1. Much depends on the load on the Xiaomi server. Xiaomi Clouds is always busy. 2. When re-registering, if the old keys are not deleted before the official version is...
``` tc32-elf-gcc.exe -E -x c++ test.cpp tc32-elf-gcc.exe: language c++ not recognized tc32-elf-gcc.exe: language c++ not recognized tc32-elf-gcc.exe: test.cpp: linker input file unused because linking not done tc32-elf-cpp.exe test.cpp tc32-elf-cpp.exe: test.cpp:...
**Reading bindkey (all keys) by double OTA.** --- Stage1:  --- Stage2: 
**2A1F** - sint16 temperature in 0.1 °C **2A6E** - sint16 temperature in 0.01 °C **2A1C** - float nRFConnect:   https://github.com/pvvx/ATC_MiThermometer
For version B1.9 in the ATC firmware, the I2C frequency is too high for the display controller. If the temperature or battery voltage is not normal, then the display will...
https://github.com/pvvx/ATC_MiThermometer/blob/master/src/lcd.c#L147