Victor

Во время подключения BLE реклама, ту которую принимает HA, не передается. При подключении потребление больше...

Отключите соединение с термометром в Android и в других. Закройте эксплорер. В HA термометр появляется с задержкой... Лучше перезапустить всю систему с HA и подождать пару минут.

Значок Bluetooth активен только во время соединения и мигает если нажата впаянная кнопка или геркон с выбором в меню функции геркона/кнопки "соединение" (обычно для Long Range).

Linux does not support the Bluetooth 5.0 specification released back in 2016. All utilities included in Bluez (hciattach hciconfig hcitool hcidump rfcomm sdptool ciptool gatttool [in 2017](https://git.kernel.org/pub/scm/bluetooth/bluez.git/commit/?id=b1eb2c4cd057624312e0412f6c4be000f7fc3617)) have long been...

> That worked and now it waits much longer however then after those 22 seconds it is cancelled anyway (maybe it does not get any data from thermometer?). Linux does...

> now it waits much longer however then after those 22 seconds This is the reason for the use of incorrect algorithms in BT Linux drivers. Earlier it was announced...

The work of “[CGPR1 Qingping Motion & Light](https://pvvx.github.io/CGPR1/)” with the official firmware completely suits me. Supported in [CGPR1_Utils.html](https://pvvx.github.io/CGPR1/CGPR1_Utils.html). I don't use "[Mijia Mi Flood Detector SJWS01LM](https://pvvx.github.io/SJWS01LM/)". I have my own...

https://pvvx.github.io/ATC_MiThermometer/TelinkMiFlasher.html 1.  2.  3. 

PrimaryService UUID16 0x1F10 Characteristic UUID16 0x1F1F Enable Notifications. CMD ID: 0x23 - Get/set utc time Send/receive: ``` // set time typedef struct { uint8_t id; // = 0x23 uint32_t time;...

If a real RTC clock is installed, then there is no clock adjustment. The answer to command `24` is `24FF`. Response to command `23`: ``` // Reply to command 0x23...