Victor
Desirable more than 10 μF (С24) and more 100 nF (C25). The fact is that a secure connection causes a lengthy encryption negotiation procedure and at this moment a lot...
> Count 1800 seconds after powered on and stop BLE to reduce battery consumption and protect against connection. И еще можно сделать включение на пол часа после повышения влажности больше...
> Is not clear to me (mostly because I do not have knowledge of the BLE protocol) what they mean by auto-connections, they mention that is when a connection is...
> И еще можно сделать включение на пол часа после повышения влажности больше 90% за несколько секунд (подышать). После нескольких повышений влажности более 90%, через пару месяцев окислятся контакты батарейки...
nRF Connect, Advertiser, set option: Connectable, interval: 4000 (2500 ms):  ``` [bluetooth]# scan on Discovery started [NEW] Device 5D:26:71:A1:D7:D4 Redmi Note 7 [bluetooth]# scan off [bluetooth]# connect 5D:26:71:A1:D7:D4 Attempting...
> I can connect with reliability using interval 4000 (2500ms), I've made several tests. > However, if I change the interval to 8000 (5000ms) it is impossible to connect! Sometimes...
@skgsergio - Useless venture. Linux is long dead - it was killed by the Arduino generation. There are hundreds of results and conferences on the topic about the small "HCI_LE_AUTOCONN_TIMEOUT"...
Set ATC_0B5EED advertise interval to 10000 ms. Initialize NanoPi R1... ``` OpenWrt 18.06.1, r7258-5eb055306f root@FriendlyWrt:~# hciattach /dev/ttyS3 bcm43xx 1500000 bcm43xx_init Patch not found for BCM43430A1, continue anyway Set Controller UART...
Windows 10, Chrome and BT-USB adapters. The device has an Advertising Interval of 10 sec. Adapter labeled 'Basseus' - scanning ok. Adapter marked "V5.0" - scanning does not find the...
? 