ATC_MiThermometer
ATC_MiThermometer copied to clipboard
pvvx
Custom firmware for the Xiaomi Thermometers and Telink Flasher via USB to Serial converter
Hi there, I love this project! And one of the last majors being able to migrate to ZigBee blow my mind! Having the possibility to add a relay I have...
## Introduction Recently I acquired a few of the Meawow MHO-C122 (2AWMOMHOC122) sensors for a bargain price. Hoping I was able to scrape the sensor data from the advertisement or...
I still find it very practical that your software allows displaying the time on the small LYWSD03MMC. Thank you very much for that. Unfortunately, even with the correction factor, it's...
Good morning I could not find information on this but I found that maximum interval for `Recording averaging measurements to flash memory` seems to be around 240. Maybe it is...
Hi. Just updated to 4.5 firmware but when tried to update do Zigbee firmware Z03MMC_v0116, get error "firmware is more than 131072 bytes". Please, advise. Thanks in advance for your...
First off I would really like to thank you for your work. I have flashed my MJWSD05MMC with your latest 4.3 beta fw I have few questions though: 1. In...
This is actually not an issue but I found out with my CGDK2 devices. I bought 3 where the SHT4x was not detected in v4.2: Zero values for temperature and...
Hello, Do you plan to do the same with other xiaomi devices? For example: mi door and window sensor 2, mi motion sensor, mi switch... ? Thanks in advance ;)
I'll keep this brief. I initially was setting my units to advertise (using ATC profile) every 10 seconds, but after seeing the graph showing that there is no/little point in...
_Сброс привязки к Mi-Home для новой активации._ 1. Удерживать две кнопки пока дисплей не моргнет (10 cек) 2. Коротко нажать верхнюю кнопку (0.5 сек) 3. Коротко нажать нижнюю кнопку (0.5...
