NOCT_SAM may not handle effective irradiance correctly

[adriesse]

Describe the problem The noct_sam temperature model has an effective_irradiance input, which would normally have a value less than poa_global, mainly due to reflection losses. This is implemented internally as an adjustment to the transmittance_absorptance parameter. However, this adjustment produces some questionable results.

Code fragment to demonstrate the problem

from pvlib.temperature import noct_sam

gpoa = 800
geff = gpoa * 0.75

wind_speed_10m = 1.0 / 0.51

NOCT = 41.6

# open circuit and max power module conditions for reuse
module_oc =dict(noct=NOCT, module_efficiency=0.00)
module_mp =dict(noct=NOCT, module_efficiency=0.20)

weather0 = dict(poa_global=gpoa, 
                temp_air=20, 
                wind_speed=wind_speed_10m,
                )
print()
print('mod temp under gpoa')
print('oc:', noct_sam(**weather0, **module_oc))
print('mp:', noct_sam(**weather0, **module_mp))

weather1 = dict(poa_global=geff, 
                temp_air=20, 
                wind_speed=wind_speed_10m,
                )
print()
print('mod temp under geff (what I would expect to be correct)')
print('oc:', noct_sam(**weather1, **module_oc))
print('mp:', noct_sam(**weather1, **module_mp))

# use the effective_irradiance input
weather2 = dict(poa_global=gpoa, 
                temp_air=20, 
                wind_speed=wind_speed_10m,
                effective_irradiance=geff,
                )
print()
print('mod temp under gpoa using separate geff input (different/incorrect)')
print('oc:', noct_sam(**weather2, **module_oc))
print('mp:', noct_sam(**weather2, **module_mp))

# replicate the tau_alpha adjustment that is inside noct_sam
weather3 = dict(poa_global=gpoa, 
                temp_air=20, 
                wind_speed=wind_speed_10m,
                transmittance_absorptance=0.9 * geff / gpoa,
                )
print()
print('mod temp under gpoa with tau_alpha adjusted externally (same problem)')
print('oc:', noct_sam(**weather3, **module_oc))
print('mp:', noct_sam(**weather3, **module_mp))

Code fragment output

mod temp under gpoa
oc: 41.6
mp: 36.8

mod temp under geff (what I would expect to be correct)
oc: 36.2
mp: 32.6

mod temp under gpoa using separate geff input (different/incorrect)
oc: 41.6
mp: 35.2

mod temp under gpoa with tau_alpha adjusted externally (same problem)
oc: 41.6
mp: 35.2

Comments on output Note that under open circuit conditions the module temperature remains at 41.6 in the third and fourth cases despite the reduction in irradiance, which is not logical. The biggest surprise comes when you set geff to small values, like 20% of gpoa because the module temperature then goes below ambient.

Additional context The noct_sam function in pvlib appears to correspond very closely to the code in SAM itself, so this problem would exist there too. But it is much easier to demonstrate it here.

Solution Reflected irradiance does not contribute to heating or electricity generation, so a single irradiance input for this thermal model is enough.

[cwhanse]

Update on this isseu: SAM code has changed to use effective_irradiance instead of poa_global for the noct_sam temperature model https://github.com/NREL/ssc/pull/1233. SAM considers the change to be correcting a bug.

I think pvlib should correct its code, with liberal in-line comments to document that the correction deviates from the published reference.

[adriesse]

I support a correction (of course). I haven't had time to look closely at the change in SAM though. Did they write anything about impact on results? Since it has been this way for so long we might consider offering both behaviors.

[cwhanse]

@pratham15541 can you clarify your comment? noct_sam doesn't current have effective_irradiance as input, and this issue's consensus is that effective_irradiance should replace poa_global.