Chris Putnam

Thanks. Will go over and try. Regarding the HBA, it's a pretty common SAS3008 HBA and on latest firmware (16.00.14.00). The backplane hasn't had a ton of insertion cycles, but...

No, unfortunately it has not, after cooking a while. I changed it out and left town -- still out of town at the moment until next week -- but I'm...

Ah, sorry. Here is the output on a sample X24 disk. It doesn't have [Enabled] at the end: ``` ========================================================================================== openSeaChest_SMART - openSeaChest drive utilities - NVMe Enabled Copyright (c)...

Thanks for the response @vonericsen -- I have actually gotten myself into that situation before and can confirm it's not a good idea :) Here is the output of that...

_EDIT: Most of this is still accurate, but the power transitions reported by smartd (0x81->0xFF) are expected because they're on WD disks that have EPC enabled._ I'm still bashing on...

(I'd edit my post above but I think most of you guys are reading via email and you might not see it) Apologies, late night jetlag brain here, but of...

Sorry for the silence on this ticket. I have some progress to share on this issue. I put in a spare SAS3008 HBA PCIe card (9300-8i) and tested the same...

I like this idea. One problem is with binsplit you don't know if the original had a pregap defined or if it used hidden audio tracks. You would need to...

Right, I know that the data would be lost if you use PREGAP to replace the track in the merged cuesheet, and I get that you're saying you'd only do...

OK, you said: > at least 345Kb per track used for nothing Implying that it could be multiple tracks that could be replaced with PREGAP. I asked twice now what...