ptx2
ptx2
Hi @Harti-801 > I was not able to test the delay of cadence and power with the bot. It is possible to change the bot's power and cadence at runtime...
@Harti-801 Btw, if you run the bot with cadence=60 do you still get dropouts?
> Unfortunately I was not able to change the values over the UDP command. Maybe I make typos or something totaly wrong. I will try again. Sorry, try adding `--bot-host...
Hi @Harti-801 are you still having issues with this?
Hi @ajs123, That sounds very doable! The [pigpio](https://github.com/joan2937/pigpio) library should work for the counting (it can give timestamped pin change events with sub 5-microsecond accuracy). Note that the Pi GPIOs...
Hey @ajs123 sorry for the slow reply here. I went through a similar decision when starting this project. The reason I chose the Pi is because it's versatile (lots of...
@Harti-801 @barrettec777 Are you still having problems with the cables?
@vcipriani Maybe this is a starting point? https://github.com/UCF-SDTeam13/echelon-bike
Hey, thanks for the kind words @EfficientSetting! Excited to hear you are working on Echelon support. Can you share the noble code that's not working? What output does noble's example...
Hey @EfficientSetting sorry for the slow reply here! I have not actually run into that issue before. It seems the service is not advertised but becomes available after connecting? To...