Usb Boot device not found...

[saradasama]

After a successful installation I received the ‘Usb Boot device not found...’ notification while I was opening ‘OrbisEyeCameraFirmwareLoader.exe’. I tried it several times without any positive results.

The related [Windows 10] system operates perfectly with any kind of installations, and the [USB] connectors have no issues. What can be the cause of the appearance of that notification? The attached [PS4 Camera V2] with the original [Sony adapter] is recognized as the ‘USB Boot’ device (after the driver installation based on the step-by-step gude) but it cannot be ‘redirected’ to be an ‘OV580’ device.

[equinox-and-solstice]

I'm not sure if this is the same thing @saradasama, but... This may make sense with the directive "Need to repeat step 4 every time you disconnect the camera for the PC" there on https://github.com/Hackinside/PS5_camera_files#instructions (where step 4 is "Make sure that the OrbisEyeCameraFirmwareLoader.exe is in the same folder as firmware.bin and run it"). Indeed, in order for the camera to work properly after a Windows restart, I always need to unplug the camera, plug it back in, wait for Device Manager to recognize it as a USB device, and then run the firmware loader again. If I don't perform each of these steps exactly, I get the "Usb Boot device not found..." message also.

[Pycnomerus]

don't follow the guide just run InstallDriver.exe Then OrbisEyeCameraFirmwareLoader.exe

it use the exact driver version to find the usb boot device so if you generate your own driver it just doesn't work