home-assistant-addons icon indicating copy to clipboard operation
home-assistant-addons copied to clipboard

Published 20 hours ago • verified publisher icon pschmitt

/run.sh: line 8: /usr/bin/flicd: No such file or directory

Open peravn opened this issue 9 months ago • 1 comments

I've been running flic buttons for 2 years, with occasional need to reboot because of flic buttons were "disconnected". Then about two weeks ago all buttons went off-line - not even flashing red when pushing the buttons. I found in the flicd log the following statement "/run.sh: line 8: /usr/bin/flicd: No such file or directory", and found that the flicd is not starting up.

I've tried reinstall but no change. I also saw on other report of this where the recommendation was to try aarch64. However it has been working on the same hardware for years. Please help.

SW: Core. 2024.5.3 Supervisor 2024.05.1 Operating System12.3 Frontend 20240501.1

HW: Raspberry Pi 3 (32-bit) Home Assistant SkyConnect (No USB bluetooth dongles attached

peravn avatar May 19 '24 12:05 peravn