ps2homebrew
[ISSUE]: Jak and Daxter: The Precursor Legacy pausing every 1-2 seconds - OPL 2063 ETH
Checks
- [X] I have checked existing OPL issues for duplicates and found none
- [X] I am using either OPL latest stable version, or archived version or OPL beta version
Describe the issue
Jak and Daxter - The Precursor Legacy [SCUS_971.24]
OPL 2063 via ETH
PS2 Slim (SCPH-90010)
With modes 1,3 and 6 enabled only, game freezes on intro logo
If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues.
Console model
SCPH-90010
OPL version / revision
2063
In which device(s) have you experienced this issue?
SMB
Context and extra information
Jak and Daxter - The Precursor Legacy [SCUS_971.24]
Just tested, works fine with v1.2.0-Beta-2068 (one of the first releases, later releases to current of 2068 are broken) had to enable only modes 3 and 6 to get it to work but runs smooth there after.
SCPH-90008 MX4SIO Jack and Daxter Precursor Legacy (USA)
On Sat, 20 Jan 2024, 16:38 Evandro @.***> wrote:
Checks
- I have checked existing OPL issues https://github.com/ps2homebrew/Open-PS2-Loader/issues for duplicates and found none
- I am using either OPL latest stable version https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest, or archived version https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A or OPL beta version https://github.com/ps2homebrew/open-ps2-loader/releases
Describe the issue
Jak and Daxter - The Precursor Legacy [SCUS_971.24]
OPL 2063 via ETH
PS2 Slim (SCPH-90010)
With modes 1,3 and 6 enabled only, game freezes on intro logo
If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues. Console model
SCPH-90010 OPL version / revision
2063 In which device(s) have you experienced this issue?
SMB Context and extra information
Jak and Daxter - The Precursor Legacy [SCUS_971.24]
— Reply to this email directly, view it on GitHub https://github.com/ps2homebrew/Open-PS2-Loader/issues/1171, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Just tested, works fine with v1.2.0-Beta-2068 (one of the first releases, later releases to current of 2068 are broken) had to enable only modes 3 and 6 to get it to work but runs smooth there after. SCPH-90008 MX4SIO Jack and Daxter Precursor Legacy (USA) … On Sat, 20 Jan 2024, 16:38 Evandro @.> wrote: Checks - I have checked existing OPL issues https://github.com/ps2homebrew/Open-PS2-Loader/issues for duplicates and found none - I am using either OPL latest stable version https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest, or archived version https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A or OPL beta version https://github.com/ps2homebrew/open-ps2-loader/releases Describe the issue Jak and Daxter - The Precursor Legacy [SCUS_971.24] OPL 2063 via ETH PS2 Slim (SCPH-90010) With modes 1,3 and 6 enabled only, game freezes on intro logo If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues. Console model SCPH-90010 OPL version / revision 2063 In which device(s) have you experienced this issue? SMB Context and extra information Jak and Daxter - The Precursor Legacy [SCUS_971.24] — Reply to this email directly, view it on GitHub <#1171>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI . You are receiving this because you are subscribed to this thread.Message ID: @.>
Unfortunately releases 2068 and 2065 dont work for me via ETH, when I set to auto it freezes the console on main menu. That's why I had to go back to 2063. Could you provide a link for this first relase so I make sure it is the same version I tried?
ETH is also broken in the version I am using unfortunately. Only thing working is BDM devices, MX4SIO and USB. I am sure the Devs are aware of what's been going on with the latest releases and are working on fixes.
On Sat, 20 Jan 2024, 18:36 Evandro @.***> wrote:
Just tested, works fine with v1.2.0-Beta-2068 (one of the first releases, later releases to current of 2068 are broken) had to enable only modes 3 and 6 to get it to work but runs smooth there after. SCPH-90008 MX4SIO Jack and Daxter Precursor Legacy (USA) … <#m_-6072367032791273791_> On Sat, 20 Jan 2024, 16:38 Evandro @.> wrote: Checks - I have checked existing OPL issues https://github.com/ps2homebrew/Open-PS2-Loader/issues https://github.com/ps2homebrew/Open-PS2-Loader/issues for duplicates and found none - I am using either OPL latest stable version https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest https://github.com/ps2homebrew/Open-PS2-Loader/releases/latest, or archived version https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A https://mega.nz/folder/Ndwi1bAK#oLWNhH_g-h0p4BoT4c556A or OPL beta version https://github.com/ps2homebrew/open-ps2-loader/releases https://github.com/ps2homebrew/open-ps2-loader/releases Describe the issue Jak and Daxter - The Precursor Legacy [SCUS_971.24] OPL 2063 via ETH PS2 Slim (SCPH-90010) With modes 1,3 and 6 enabled only, game freezes on intro logo If disabling pad emu, game works fine until first CGs then starts pausing every 1-2 seconds. In game, same pausing issues continues. Console model SCPH-90010 OPL version / revision 2063 In which device(s) have you experienced this issue? SMB Context and extra information Jak and Daxter - The Precursor Legacy [SCUS_971.24] — Reply to this email directly, view it on GitHub <#1171 https://github.com/ps2homebrew/Open-PS2-Loader/issues/1171>, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI https://github.com/notifications/unsubscribe-auth/BEOXDU7ALQS63ZAVM7D2K63YPPJG3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMBXG4ZTOMI . You are receiving this because you are subscribed to this thread.Message ID: @.>
Unfortunately releases 2068 and 2065 dont work for me via ETH, when I set to auto it freezes the console on main menu. That's why I had to go back to 2063. Could you provide a link for this first relase so I make sure it is the same version I tried?
— Reply to this email directly, view it on GitHub https://github.com/ps2homebrew/Open-PS2-Loader/issues/1171#issuecomment-1902169899, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEOXDU7R2Z446MNVZAZJK6LYPPXA3AVCNFSM6AAAAABCDHSZ6KVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBSGE3DSOBZHE . You are receiving this because you commented.Message ID: @.***>
Still not working with 2049, run1342.
Even worse now because as soon as first cutscene shows, it appears PAUSE on screen.
modes 3 and 6 and pademu off (gsm is already off by default)
Still not working with 2049, run1342.
Even worse now because as soon as first cutscene shows, it appears PAUSE on screen.
modes 3 and 6 and pademu off (gsm is already off by default)
Have you tried the latest beta build 2070? This build seems to have resolved a lot of issues. I still had to enable modes 3 and 6 to get it to run but runs smooth with MX4SIO, have not tried ETH.