PrusaSlicer
PrusaSlicer copied to clipboard
prusa3d
Top layer not flat
Description of the bug
The top layer of the inside of the container is not flat. When I change the layer height to anything lower than 0.4mm, the problem doesn't occur. It also doesn't occur on PrusaSlicer version 2.5.0.
2.6.0:
2.5.0:
Project file & How to reproduce
Slice the model with the current configuration.
Checklist of files included above
- [X] Project file
- [X] Screenshot
Version of PrusaSlicer
Version 2.6.0-alpha2+win64
Operating system
Windows 11
Printer model
Prusa MINI+
Hi, we reproduce the issue with a nonflat sliced model. But this issue is the same for 2.6.0a1 and 2.5.0. Can you provide us with your original .slt? We would like to try to reproduce it from the very first beginning. Thanks
It also doesn't occur on PrusaSlicer version 2.5.0.
I see the same behavior in 2.4.0, 2.5.0, 2.6.0-alpha2...
Hi, we reproduce the issue with a nonflat sliced model. But this issue is the same for 2.6.0a1 and 2.5.0. Can you provide us with your original .slt? We would like to try to reproduce it from the very first beginning. Thanks
I got the STL Containers200x100 from Printables.
It also doesn't occur on PrusaSlicer version 2.5.0.
I see the same behavior in 2.4.0, 2.5.0, 2.6.0-alpha2...
It happens on other versions too only if you open the 3MF file I provided (which was cut in 2.6.0-alpha2). If you slice the original STL (and cut it in 2.5.0) Containers200x100 from Printables in 2.5.0 there aren't any issues.