All sliced files stop at first layer, after the skirt.

[flynetstudios]

Description of the bug

Any file that i try to slice, just top the print in the first layer, after the skirt. This was testes with two different printers and with many files, i go to upload here two different gcodes, maybe you can find the issue here. I already reinstalled Prusa slicer 2.5 and deleted printers and presets, all reverted to stock.

Project file & How to reproduce

Checklist of files included above

• [ ] Project file
• [ ] Screenshot

Version of PrusaSlicer

2.5.0 x64

Operating system

Windows 10

Printer model

PrusaSotpIssue.zip

ender 3

[lukasmatena]

I don't see any problem. The 3MF sliced fine in both 2.5.0 and 2.6.0, both G-Codes seem fine. Can you please check that the problem is not on your end? Thanks.

[flynetstudios]

Did you try to print the gcode ?? The files slice perfect and i can see the simulation, but when i go to print the files, the print just stop and the printer get back to the ambient temp and the nozzle stay in the middle. Also, how can this be a problem on my end, if i can print other files, and also this is happening in two printers ?? Any suggestion about how to check it ??

[lukasmatena]

@flynetstudios Well, at first I did not try to print it, I don't have an Ender. But I sliced the 3MF and checked the preview, checked your gcode in gcodeviever and inspected the first layer in notepad. I looked into the parameter tabs. Nothing caught my eye.

Now I tried to feed your G-codes into my MK3. Both printed fine for the first several layers, until I stopped them:

So I highly doubt there is a problem with the G-code.

Also, how can this be a problem on my end, if i can print other files, and also this is happening in two printers ??

I don't know. We already saw mysterious issues and some of them had unexpected reasons. For example, corrupted file on a faulty SD card, firmware bugs, hw issues, etc.

[flynetstudios]

After several test, i found the source of the issue. Im using beagle camera and ender 3 printer, with marlin 1.0.1. The problem is related to latest beagle camera firmware 1.7 and 1.6. Downgraded to firmware 1.5 and 1.4 and everything is working flawless. I already contaced to the Mintion team, and they are checking whats wrong with the firmware. Nothing wrong with Prusa Slicer after all.

I hope this can help to other users facing the same issue.

[lukasmatena]

Thanks for the update. Closing.