PrusaControl
PrusaControl copied to clipboard
PrusaControl not exporting .gcode from Slic3r.
If I slice a .STL in Slic3r then export the .gcode and import into PrusaControl to do colour changes when I export the .gcode PrusaControl just hangs and does not complete the export.
But if I slice a .STL from Simplify3D and try the colour change it exports fine.
Ive tried this on both a Mac and Windows.
Slic3r version 1.38.5-prusa3D PrusaControl 0.9.4_415_beta
Hello,
I would suggest using this website for already sliced files: https://www.prusaprinters.org/color-print/
Best regards,
Jennes De Schutter Customer Support
PRUSA Research
+420 222 263 718
+421 220 570 305
Partyzánská 188/7a, 17000, Prague
shop.prusa3D.com
For simple troubleshooting help you can check our help page: http://help.prusa3d.com
--- original message --- On Fri, Dec 29, 2017 at 01:16 pm, [email protected] Tucker2015 wrote:
If I slice a .STL in Slic3r then export the .gcode and import into PrusaControl to do colour changes when I export the .gcode PrusaControl just hangs and does not complete the export.
But if I slice a .STL from Simplify3D and try the colour change it exports fine.
Ive tried this on both a Mac and Windows.
Slic3r version 1.38.5-prusa3D
PrusaControl 0.9.4_415_beta
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---
Thanks Jennes, I have been using this today and it works fine. Just thought I would let you know about the issue.
Hello,
Thank you very much for letting us know.
Best regards,
Jennes De Schutter Customer Support
PRUSA Research
+420 222 263 718
+421 220 570 305
Partyzánská 188/7a, 17000, Prague
shop.prusa3D.com
For simple troubleshooting help you can check our help page: http://help.prusa3d.com
--- original message --- On Fri, Dec 29, 2017 at 02:05 pm, [email protected] Tucker2015 wrote:
Thanks Jennes, I have been using this today and it works fine. Just thought I would let you know about the issue.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---
I have the exact same problem. Upon clicking the "save g-code" button it will hang before getting to 100%. Most commonly for me, it'll hang at 98%. The resulting output file will have the M600 commands, but will be missing a few hundred lines of the rest of the gcode.
Guessing it’s not been fixed then in latest version ?
Sorry I should have specified - I'm on 0.9.4_415, which I think is still the latest version as of this date.