prusa3d
Scale Bugs Out When Changing
Version: PrusaControl 0.9.4_215
When you change the scale by delete all the numbers and leave the percent sign (X). When you enter a number the other scale fields (Y/Z) will get set to be 9999% even if you only put in 1%(X) in the other fields.
Which causes one hell of a headache trying to fix the scale as well as Prusa Control locks up due to the scale being so large.
Hello,
Is the lock next to the X Y Z selected? This makes sure you scale evenly along all axes.
Best regards,
Jennes De Schutter Customer Support
PRUSA Research
+420 222 263 718
+421 220 570 305
Partyzánská 188/7a, 17000, Prague
shop.prusa3D.com
--- original message --- On Mon, Nov 20, 2017 at 02:25 pm, [email protected] Dakota McCutcheon wrote:
Version: PrusaControl 0.9.4_215
When you change the scale by delete all the numbers and leave the percent sign (X). When you enter a number the other scale fields (Y/Z) will get set to be 9999% even if you only put in 1%(X) in the other fields.
Which causes one hell of a headache trying to fix the scale as well as Prusa Control locks up due to the scale being so large.
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---
The lock is selected next to the XYZ. I always have to unselect it to fix the scale when it automatically changes the other two to be 99999% thats only if the program doesn't lock up.
I narrowed the issue down to be when one of the three is set to be zero in this case I wanted to change them all to be 200% so I deleted the 1 when the lock is enabled it will set the XY to be 99999%.
Hello,
I see the issue now. I will report this. Thank you.
Best regards,
Jennes De Schutter Customer Support
PRUSA Research
+420 222 263 718
+421 220 570 305
Partyzánská 188/7a, 17000, Prague
shop.prusa3D.com
--- original message --- On Mon, Nov 20, 2017 at 03:08 pm, [email protected] Dakota McCutcheon wrote:
The lock is selected next to the XYZ. I always have to unselect it to fix the scale when it automatically changes the other two to be 99999% thats only if the program doesn't lock up.
I narrowed the issue down to be when one of the three is set to be zero in this case I wanted to change them all to be 200% so I deleted the 1 when the lock is enabled it will set the XY to be 99999%.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---