Prusa-Link
Prusa-Link copied to clipboard
prusa3d
Steps to repeat: 1. Check your machine printing statistics, I noticed with the `total filament` stat. 2. Print something via Prusa Link. 3. Check your stats again. Machine runtime and...
After installing prusalink 0.7.2 on Raspberry Pi Zero 2 itself plugged on Prusa MK2.5S+ with serial USB cable, I've noticed a layer shift phenomenon after ~2hours printing on 3 different...
As the **owner of a Prusa Enclosure** I want to **monitor the xBuddy board temperature** So that **I can take measures when the temperature gets too high** **Background** When printing...
I want to send individual G-Codes like G28, G0,… to the printer via Prusalink, so I can control it remotely (via WiFi) without having to go to the LCD and...
It would be great if, on Prusalink on the Mk4, we could specify our own passwords, or disable security entirely. For those of us on home networks, behind routers with...
It would be cool to be able to do the following: 1. Have the printer powered off 2. Slice and upload the gcode to queue from prusaslicer or prusaconnect website...
Hello, I can't seem to find any reference to the new Rapsberry PI 5. Is it supported? Would I just follow the steps for the 3/4 to set it up?...
File Upload dialog window defaults to filter .gcode files, so doesn't display .bgcode files. You have to set it to all files. Minor point, but would be good to have...
Not sure if this is a feature or a bug (or an issue with the firmware of the printer itself) but I've noticed the 'Status' of the printer (as reported...
Add stats on files to track how many time they were printed and abort etc ...
