Prusa-Link-Web icon indicating copy to clipboard operation
Prusa-Link-Web copied to clipboard

Published 20 hours ago • verified publisher icon prusa3d

Nozzle Diameter is reported incorrectly.

Open BrienKing opened this issue 1 year ago • 7 comments

It shows it as .40 mm when I have the .6 installed and the part printed was sliced with .6.

image

BrienKing avatar Nov 04 '23 21:11 BrienKing

Depending on what machine this is you need to set the nozzle diameter in the menu of the printer. I know on the MK3 it's in the 'HW setup' menu and on the MK4 I think it's in 'Settings - Hardware'.

darraghbr avatar Nov 27 '23 16:11 darraghbr

Yes, it was set in the menu.

BrienKing avatar Nov 27 '23 17:11 BrienKing

I think it might be helpful if you specified which printer you were using?

It's currently working fine on both my MK3S and my Mini.

image

darraghbr avatar Nov 27 '23 17:11 darraghbr

XL

BrienKing avatar Nov 27 '23 18:11 BrienKing

In my case PrusaLink seems to report the nozzle diameter of the first extruder (0.8mm) even when printing with any of the other four extruders (with 0.4mm nozzles) on the 5T XL.

xnk avatar Dec 06 '23 13:12 xnk

I have the same problem. I installed 0.4mm nozzles on my XL-2T (both tool heads), went into the menu on the printer and selected 0.4mm and PrusaLink still stubbornly reports I have 0.6mm nozzles installed.

Gefionious avatar Dec 13 '23 00:12 Gefionious

Quick update on my side, this issue continues even with the latest firmware on the XL (5.1.2?). This includes using the new calibration process to select the nozzle size of 0.4mm for both tools. PrusaLink still reports 0.6mm nozzles incorrectly on both toolheads.

Gefionious avatar Dec 18 '23 15:12 Gefionious