[BUG] XL 5T Printer gets stuck in wait for Connect connection and pauses print

[petternilsen]

Printer type XL

Printer firmware version - [e.g. 4.0.5, ...] 6.0.0 RC3

Original or Custom firmware - [Original/Custom] Original

Optional upgrades - [e.g. Filament Runout Sensor]

USB drive or USB/Octoprint I print via Prusa Connect.

Describe the bug The printer apparently got a temporary network error while connected to Connect, showed an error about the USB, then never continued printing the remaining of the model.

How to reproduce Not sure, but perhaps disconnect the network while it's printing from Connect, then reconnect and see if the printer is able to continue.

Expected behavior Printer should be able to continue printing when the network is up again. See also https://connect.prusa3d.com/printer/00339b14-b4bc-4137-b900-d47a96912430/jobs/4 for the exact job, if that is useful.

G-code Please attach the G-code you had trouble with. This will make it easier for us to replicate the error.

Crash dump file Please send the crash dump file to Prusa by emailing it to [email protected]. Sharing this file is important and helps us investigate the bug.

Do not share the file publicly, as the crash dump contains a raw snapshot of the printer's memory and may include unencrypted sensitive information.

Video Please attach a video. It usually helps to solve the problem. sonic_0.4n_0.2mm_PLA,PLA,PLA,PLA,PLA_XLIS_10h25m.bgcode.zip

[petternilsen]

The print never resumes as the printer is unable to re-connect to connect. The only way to not lose a many hours print seems to be to power cycle the printer, then it seems to pick up again when the USB failed.

[github-actions[bot]]

This issue has been flagged as stale because it has been open for 60 days with no activity. The issue will be closed in 7 days unless someone removes the "stale" label or adds a comment.

[github-actions[bot]]

This issue has been closed due to lack of recent activity. Please consider opening a new one if needed.