Model of the MK2(S) y-carraige

[SnupSnurre]

Im looking for a model (stl, dxf or likely) of the Y-carraige used in MK2(S). Need the files for reference in Fusion360. Can't find them anywhere, neither could you support chat, who directed me here.

Thanks :-)

[prusa3d-bb]

Hello,

Here is the link you need. Downloads contain both STLs and SCAD files. https://www.prusa3d.com/prusa-i3-printable-parts/

Best regards, William Holm Customer Support

PRUSA Research

+420 222 263 718

+421 220 570 305

188/7a Partyzánská, 17000, Prague

shop.prusa3D.com

For simple troubleshooting, please use: http://help.prusa3d.com

--- original message --- On Fri, Aug 10, 2018 at 11:34 am, [email protected] KasperADK wrote:

Im looking for a model (stl, dxf or likely) of the Y-carraige used in MK2(S). Need the files for reference in Fusion360. Can't find them anywhere, neither could you support chat, who directed me here.

Thanks :-)

—

You are receiving this because you are subscribed to this thread.

Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---

[SnupSnurre]

The zip-files for MK2 and MK2S only contains two folders: Printed Parts and Heatbed. None of these contains the Y-Carriage.

[DeJennes]

@KasperADK there is a DXF file for the frame. The Y carriage is included there

[lecktor]

I've added separate file (+ some modifications) here: https://github.com/lecktor/lecktor3D/tree/master/heated_bed green -> engrave (0.5mm) red -> cut first white -> cut second