MK2.5 RAMBo base extruder cables hole is too tight

[gregsaun]

Hole for extruder cables is too tight on both RAMBo base and cable clip. This might also damaged the extruder's cables.

Current hole radius is 5.5mm (with cable grips at 5mm). Radius should be at least rad 6mm (grips at 5.5mm), maybe 6.5mm (grips at 6mm).

[prusa3d-bb]

Hello, Thank you for your feedback, we will check it with our developers! Kind regards

— Lukáš Vacek Customer Support

PRUSA Research +420 222 263 718 +421 220 570 305 188/7a Partyzánská, 17000, Prague shop.prusa3D.com

For simple troubleshooting, please use: http://help.prusa3d.com

Please rate our reply ...be generous :-)

--- original message --- On Mon, Mar 19, 2018 at 12:41 pm, [email protected] Grégoire Saunier wrote:

Hole for extruder cables is too tight on both RAMBo base and cable clip. This might also damaged the extruder's cables.

Current hole radius is 5.5mm (with cable grips at 5mm). Radius should be at least rad 6mm (grips at 5.5mm), maybe 6.5mm (grips at 6mm).

—

You are receiving this because you are subscribed to this thread.

Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---