GNUVario-TTGO-T5
GNUVario-TTGO-T5 copied to clipboard
prunkdump
The GNUVario source code for the TTGO-T5
An error appears when trying to compile the code .../IntTW.h:156:3: error: 'i2c_t' does not name a type; did you mean 'ino_t'? i2c_t* i2c; ^~~~~ ino_t ...\IntTW/IntTW.h:157:3: error: 'i2c_err_t' does not...
I just built a GNUVario-E with the PCB v2 and a TTGO-T5 v2.4 with a Display DEPG0150BN - so not the recommended Good Display Unit. When the speaker is connected,...
Hi, The [component list](https://prunkdump.github.io/GNUVario-TTGO-T5-website-EN/materiel/composants.html) says that I should use lilygo t5 with epaper display GDEW029M06 from Good Display. Will this one do fine: https://www.banggood.in/LILYGO-TTGO-T5-V2_4-Wifi-And-bluetooth-Basis-ESP-32-Esp32-1_54-or-2_13-or-2_9-EPaper-Diaplay-Module-Screen-Board-p-1691986.html It's unclear which epaper display it...
Discovered a little bug today. When the vario is set to be muted until start of the flight it is also muted during the calibration. So to hear the buzzer...
Hi Dev, Thank you very much for sharing this project! I have just built one unit and have used it once but it is fantastic! Love the way your integrating...
On the web configuration page of the variometer, when you check the option integration of variometer and reboot your vario, the main page is frozen and nothing work anymore. The...
Hello First of all thank you very much for your awesome work ! I think it could be a nice feature to be able to upload tracks on a webdav...
Could you share the raw design files for the 3d printed casse that folks could modify? Thanks a bunch.
Hello I built the vario on TT w/ 2.9'' paperink screen I did setup Hardware config etc .. and compiled successfully GPS / Display work fine. Pressure sensor works fine...
Hi. I was looking to build a vario with an epaper display, and stumbled upon this project. This seems exciting enough and I'm looking to contribute in any way I...