procount
procount
If you set a "sticky default" option, then that is what it is supposed to do - bypass the boot menu and boot your selected OS immediately. If you don't...
Apologies if the documentation is not clear enough. This is compounded by the changes required for the Pi5 that haven't percolated into all parts of the documentation yet. Firstly let...
Updates done. BTW - you can change the options directly in PINN using https://github.com/procount/pinn/blob/master/README_PINN.md#easy-config-file-editor Then you don't need to remember the name of the file or the names of the...
There was an issue with the kernels in my first upload of 3.9.7. It has now been updated. Please try installing it again. If it was an upgrade and you...
Just stick with 3.9.3 for now then. I'll take a look when I can.
This issue is just another symptom that has the same cause as #918. I have pulled 3.9.7 as a bad build and will release a replacement once it is building...
Have you installed PINN to your SSD? It sounds like you may have PINN on your SD and then are installing your OSes to the SSD (or maybe in your...
I don't have a PiKVM to test this.
That's a very kind offer, but maybe we can do some investigation beforehand. What is the output of the following commands with and without the PiKVM attached? ``` ls -R...
Am I right in thinking that the PiKVM mouse does follow your movements correctly, but there is an additional drift or random component added to that? Because it looks like...