proasnet

I have a network with Mikrotik components, RouterBoard. My network working fine. I have not a IP150, but IP100. Yesterday, PAI working the whole day to now. I can't explain...

My configuration is LOGGING_LEVEL_CONSOLE: 20 LOGGING_LEVEL_FILE: 40 CONNECTION_TYPE: IP SERIAL_PORT: /dev/ttyUSB0 SERIAL_BAUD: 57600 IP_CONNECTION_HOST: 192.168.0.180 IP_CONNECTION_PORT: 10000 IP_CONNECTION_PASSWORD: paradox KEEP_ALIVE_INTERVAL: 50 LIMITS: zone: auto user: 1-2 door: '' pgm: 1-5...

Keep alive interval 50 I tried today, from 10. This change was not effect for resolve problem. Now I have 10 back and still trying connect. I tried babyware over...

I am attaching some screenshots from HA. Thank you.    

1. If I see a times in logs, every starting connections every about 25-26 seconds 2. Are two states. Few days ago, I migrated HA from RPI3 to x86, both...

It depends on how this question is meant. The whole HA system is much faster and there is no problem with the system freezing. PAI had connection problems even before...

I also wondered if it is possible to use the Moxa nPort 5110, which I have unused at home, instead of the IP100 with your accessory. I once tried it...

nPort is ethernet serial server, low cost, is similar as telnet via esp in your PAI project, but this device standard using drivers in OS and create remotelly COM port....

Interesting. Thank you. I will test it in near time. Today, I get a new IP150S and I try replace old IP100, I will see, that this help me fix...

Oh, tested 1,5 year later :D. But working. Thank you very much, and happy christmas !!!